Sleeping platform teaser

[BproofOG]

Well....
I bough the 3/4 plywood for the delica sleeping platform and my hatches arrived last week - so I got at it. I started by removing the curtians and curtian rods (Yes Vanessa you can have them for helping me by test driving it for me) and I removed the back seat and the back seat belts. I want a very clean looking inside. I also installed a 6 plug power bar that gets its power from the enternal plug in that Jay install when I picked up the delica.

I'll post the complete how to guide once do but wanted to post a few teaser pics.

PA300134.JPG (71.77 KiB) Viewed 5314 times

PA300137.JPG (60.9 KiB) Viewed 5315 times

PA300138.JPG (68.31 KiB) Viewed 5314 times

rear sealt belt has been removed

PA300139.JPG (51.8 KiB) Viewed 5314 times

front curtain rod removed

PA300141.jpg (32.38 KiB) Viewed 5314 times

rear curtains removed

PA310148.JPG (70.92 KiB) Viewed 5315 times

the start of my sleeping platform - the hatches will allow access to the gear without having to access it my the rear door of the delica

[Mbryant]

I am looking forward to seeing the rest of the project. I am curious why you removed the curtains for a sleeping area? Did you cover the plywood with carpet? The hatches look very professional.

[BproofOG]

The curtains are going to be replaced with a removeable insulated window treatment so when I am sleeping I can stay warmer or cooler depending on the season. the natural light will come from my crystal light roof.
Yes that is indoor/outdoor carpet. I am really pleased with the hatches they are 30"x 12" and they were only 42.00 each. I was just out working on the rest of the platform and it is coming along quite nicely.

[Shaun Van Ramen]

BproofOG -
What are your plans for the curtains? Is it going to be curtains for them (sorry, had to!).
I am looking for curtains for my '91 or at least the runners.
Please PM or email me if they are available.

[RichD]

the start of my sleeping platform - the hatches will allow access to the gear without having to access it my the rear door of the delica

With our sleeping platform, we found that most of the access was done from the side door.

I like the hatches.

[BproofOG]

Hi Shaun Van Ramen

the curtians have already been spoken for - my friend from Rossland BC is getting them she helped me with getting this delica so I am a little in her debt.

[fexlboi]

I am looking for curtains for my '91 or at least the runners

You can get similar runners at HomeDepot. Search the forum, some people here used them already.

[gtexjunkie]

They don't seem to be stocking them anymore, I tried a few places. I tried Home Hardware and they had some. Same Levalor brand sliders.

[Shaun Van Ramen]

Hi Shaun Van Ramen

the curtians have already been spoken for - my friend from Rossland BC is getting them she helped me with getting this delica so I am a little in her debt.

No Problems!

I have checked out 2 Home Depots and no luck on the rollers. But me thinks me has other ideas based an other members experiences.

Will post when something happens in that vein!