Delica Canada | Mitsubishi Van Club

I think Old Man Emu out of Australia makes them. Probably alot of cash to bring in though. I know there are custom spring shops out there too that will design them to your specs. A set of custom progressives would be awesome!

Have you tried fitting your '99 with 33's? I can fit 33x10.5 on stock...

I reply when I can offer something to the conversation. I think a lot of hits are international. When this place was rockin' we had members from all over the globe.

Google toyota sequoia spacers in pajero or montero. I forget what years fit truck but I think it was most if not all. 4x4wire and other forums are great sources of info.

I believe they only come in 1" but there may be more options available.

FWIW, I installed a Curt Hitch for a Montero, and it bolts right up to my '92 SWB Pajero.

So turns out the squealing noise I thought might be the turbo ended up being the speedometer cable.

I'm still working away at my cold starting issues. ( I know I'm slow . I purchased an injection pump rebuild kit and I'm going to pull my pump and rebuild it this winter. Hopefully she runs like a...

So the bando belt is long enough but not wide enough.

Raybestos PG349C
Wagner PD349
Wagner MX349
Wagner ZX349
IMC Advics D718AD

The above is based on 1991 Montero.

I went with the Wagner PD349 ThermoQuiet Ceramic as it was well priced.

edit: I cross referenced to a CAT 307 mini excavator with a 4m40 engine, and a 3100101 shows up, its 50mm, 400W and $32 at Part Source

Chiming in a few years later to say that 3100101 fit perfectly without the need to trim.

Thanks to all of you guys!
I have managed with Rockauto for now but still had to return front rotors.
When I will be settled somewhere for tge winter I will look into the suggested sites.
Thanks a lot again.

Agreed with Growler... initial stretch and then you should be good until the next belt. Marking is a good idea for sure. If you ever get in to Calgary sometime come by and we can have a good look at it and see if anything else is going on there.

Yes it went fine! I got my parts somewhere else. The problem with RockAuto is they don't have DOHC.

But it's all good now thanks!

Thanks for the offer Phil. About 2hrs from Airdrie. Will stick to my appointment on Monday.

Cheers!

By the way it would be fun to have a meet and great in the Calgary area!

Not sure, mine only dims a bit but are very close when the dimmer feature is at max. Maybe the dimmer pot has failed or has a loose wire.

All the glass is the same from montero to pajero. The only exception may be sliders on rear quarters versus non-sliders, depending on your model.

I bought a passenger's side front window (after I cleaned the glass out of my ear) from a local mitsu dealer. No problem.

The body is the same, barring...