Hello Everyone,
I was curious if anyone knew the wheel alignment specs on a '90 Delica Exceed? Where could I find them and other information on this make and model? Any manuals by chance?
Thanks,
O.G.
Wheel Alignment Specs.....
-
old growth
- Posts: 9
- Joined: Tue Apr 01, 2008 3:55 am
- Vehicle: Delica Exceed, '90
- Location: Toronto/Victoria
-
Erebus
- Posts: 1369
- Joined: Mon May 28, 2007 7:55 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed
- Location: Edmonton, Alberta
- Location: Edmonton (was Calgary until 2017), Alberta, Canada
- Contact:
Re: Wheel Alignment Specs.....
I couldn't find the numbers in the wiki, but I did write down numbers that Mystery Machine posted either here or on the UK forum. Not positive what year it applies to, but pretty sure it would work for a 92 -- that's what I've got, why would I write them down if they didn't apply?
Camber 0 degree, 30 minutes plus or minus 45 minutes
Caster 3 degrees plus or minus 1 degree
Toe-in (at wheel rim) 0-3
Toe-in (per wheel) plus or minus 8 minutes
Castor probably not adjustable
That's what I wrote down. Take it for what it's worth.
Camber 0 degree, 30 minutes plus or minus 45 minutes
Caster 3 degrees plus or minus 1 degree
Toe-in (at wheel rim) 0-3
Toe-in (per wheel) plus or minus 8 minutes
Castor probably not adjustable
That's what I wrote down. Take it for what it's worth.
"I could be just around the corner from heaven, or a mile from hell." -- Jackson Browne, "The road and the sky".