MUT2 Scanner in the Vancouver area?

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
riverrio
Posts: 2
Joined: Mon Oct 08, 2018 6:42 pm
Vehicle: 1998 Delica L400 2.8L TD
Location: Vancouver BC

MUT2 Scanner in the Vancouver area?

Post by riverrio » Tue Jul 16, 2019 2:43 pm

I have a '98 diesel and my SRS airbag light won't turn off. This forum: http://www.delicaclub.com/viewtopic.php ... &p=169228 suggests I might be able to reset it with a Mut scanner. I called CVI, Rising Sun, Japanoid, and the Langley Mitsubishi dealer, with no luck. Does anyone know somebody in the Vancouver area with a mut2 scanner?

saltypeanuts
Posts: 10
Joined: Sun Oct 22, 2017 1:19 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 Series 2
Location: Calgary AB

MUT2 Scanner in the Vancouver area?

Post by saltypeanuts » Thu Sep 05, 2019 9:47 am

I managed to clear an airbag code without a MUTII on my 2000! See this info from my previous post:

Posting for information. I triggered an SRS light messing around with the electrical system. Today I was able to connect to the SRS module and clear the code. My van is a 2000 Series II, Diesel. Wasn't able to connect to the OBD module, maybe a MUTII is still required for that.

The scantool is an Autel ML 619, $150 on Amazon. If anyone in the Calgary area needs their SRS or ABS codes checked or cleared, PM me and I'd be happy to help.

poochike
Posts: 152
Joined: Sat Jun 25, 2011 12:52 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1999 L400 Chamonix Gen2
Location: vancouver
Location: Vancouver

MUT2 Scanner in the Vancouver area?

Post by poochike » Wed Oct 09, 2019 8:52 pm

RJD auto in North Vancouver has a scanner that works on the ABS and probably the SRS codes also. They are currently chasing down and ABS issue for me and there scanner not only shows codes , it graphs the sensors and can tell when one drops out when it shouldn't. Mine is a series 2 L400 diesel, but it works on the V6 too.

Good luck

Post Reply

Return to “L400 Technical”