FRONT BRAKE PART #'S??!!! Please?

[macro]

I've searched this site to no avail, I'm in Ontario and need new front rotors/calipers for a '96 L400. If anyone can tell me what the make and part # is for this, or point me to the right forum post that would be greatly appreciated. I bought Montero rotors. Not the same. Hahahaha, Help please!!

[CREGAN]

Not sure of the part #'s but I bought calipers and pads from Napa this summer for the montero and they were an exact fit. Rotors will have to be special ordered from a Delica Parts dealer.

Craig

[macro]

Crap. That's what I was thinking, the pads I bought will work, but the rotors are hooped because of the calipers sticking. Time to kick back and wait for a delivery I guess!

[Feds]

I read somewhere recently that you can bore out the Montero rotors to fit?

I also found out that Mitsubishi basically made 1 brake pad for most of the 90's, so there is a big selection of applicable parts out there.

[MardyDelica]

hi, the front & rear brake pads is similar to 1992-1994 mitsubishi montero 3.5 liter or 3 liter
the front rotor for L400 is not the same totally different.
you need the one came from china , original or othe rpalce specially for spacegear L400
cheer;s
Mardy

[jessef]

I've searched this site to no avail

I put in rotors and this came up. 2 second search

http://www.delica.ca/forum/l400-4m40-28 ... ght=rotors

Front and rear brakes are identical to North American Mitsubishi Montero 1994 (V6 model) for the exception of the front rotors only * see below.

* The axle hub is different on the L400's. It is thicker on the inner section hence the larger diameter wheel bearing.

[macro]

I've searched this site to no avail

I put in rotors and this came up. 2 second search

http://www.delica.ca/forum/l400-4m40-28 ... ght=rotors

Front and rear brakes are identical to North American Mitsubishi Montero 1994 (V6 model) for the exception of the front rotors only * see below.

* The axle hub is different on the L400's. It is thicker on the inner section hence the larger diameter wheel bearing.

Yep, well, hahahahaha. you win this round!!! I've got rotors on the way, along with a MUCH needed block heater. I told my mechanic about how much of an apparent pain in the a@@ it is, he didn't look happy with me. Maybe time to find someone who WANTS to work on something new and awesome they've never seen before!

Thanks for the help everyone.

[jessef]

it is a royal pain. if the person doing the install is a 'large' man, he can forget it !