injector crush seals

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
lopar
Posts: 201
Joined: Sun Jun 20, 2010 7:21 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 (soon)

injector crush seals

Post by lopar »

is there a local (Lordco, NAPA........) P/N for the injector crush washers? installing my rear one and I may have seen the last of the dropped washer :oops:

or can these be "eyeballed" up at parts store?
Top
lopar
Posts: 201
Joined: Sun Jun 20, 2010 7:21 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400 (soon)

Re: injector crush seals

Post by lopar »

Keep screw it all!!!!!!!!!!! 8-) need the smaller nozzle washers as well, new injectors only came with large ones.............

despite the usual dealer sales bickering in other posts.......... dealer most than welcome to sell me something :-) Comox by the way.......... :-(
Top
User avatar
Rising Sun Auto Import
Posts: 1366
Joined: Sat Nov 08, 2008 10:45 pm
Vehicle: dealer#31128, L400 super exceed
Location: New Westminster, BC
Location: New Westminster, BC
Contact:
Contact Rising Sun Auto Import

Re: injector crush seals

Post by Rising Sun Auto Import »

pm sent.
Rising Sun Auto Import Inc.
**Ultimate Home of Delica in North America**
**Korea D4BF( 4D56 ) Complete Engine & New Block Import &Installation**

Delica Injection Pump Rebuilt, Cold Start & Engine/Turbo Work Specialist
Unlimited source for new & used parts
Top
Post Reply

Return to “L400 Technical”