trouble starting
-
abbot
- Posts: 5
- Joined: Thu Jan 14, 2010 6:50 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: mitsubishi L300
trouble starting
i have done the head gasket on my l300, i got it started and went for a drive and it cut out, got it home but now not starting again, got fuel and spark so think it is timeing but don't know how to reset it, plz can you help
-
thedjjack
- Posts: 2025
- Joined: Wed Jan 27, 2010 12:13 am
- Member's Photo Album: http://www.delica.ca/forum/ucp.php?i=164
- Vehicle: 1989 L300 HITOP!!
- Location: Port McNeill
- Location: Port McNeill
- Contact:
Re: trouble starting
What motor?
unless it is a gas motor, I am concerned you have spark?
No spark on diesel.
unless it is a gas motor, I am concerned you have spark?
No spark on diesel.
-
Golf Cart
- Posts: 857
- Joined: Tue Jul 15, 2008 10:57 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Exceed
- Location: Maple Ridge
Re: trouble starting
How did you set it after you replaced the head gasket ?
By the time you realize that my signature has no real message or life altering words of wisdom, you're too far into it to stop reading until you are finished
-
abbot
- Posts: 5
- Joined: Thu Jan 14, 2010 6:50 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: mitsubishi L300
Re: trouble starting
it is a petrol ??. everything was at tdc but still not start