How can i find out if my turbo is working properly.

pr222 · Post by **pr222** » Wed May 30, 2012 10:01 pm

i have a 92 L300 exceed Turbo diesel 5 spd.

My turbo maxes out at 10 psi. It Idles at 0, there is no vac pressure.
How much vac pressure should there when idling?
How much boost should i get from the turbo?

sub-arctic · Post by **sub-arctic** » Wed May 30, 2012 10:08 pm

as far as i know the manifold will produce no vacuum pressure, thats why the back of the alternator has a vac pump built into it to run your brakes etc. there wont be any boost at idle because the turbo wont spool until higher rpm. not too sure on the boost psi though. anyone else have the numbers?

hope this helps

legionnair · Post by **legionnair** » Thu May 31, 2012 6:54 am

10-11 is very standard, some people set hem higher Max is 15 but done at your own risk.

Sounds like yours is working great

Dustin

mararmeisto · Post by **mararmeisto** » Thu May 31, 2012 11:12 am

"How can i find out if my turbo is working properly"

If you can achieve/maintain over 50 km/h on the highway...

jwfchase · Post by **jwfchase** » Thu May 31, 2012 1:08 pm

mararmeisto wrote:"How can i find out if my turbo is working properly"

If you can achieve/maintain over 50 km/h on the highway...

Which highway?....

Post by **FalcoColumbarius** » Thu May 31, 2012 1:12 pm

jwfchase wrote:
mararmeisto wrote:"How can i find out if my turbo is working properly"

If you can achieve/maintain over 50 km/h on the highway...

Which highway?....

When things go better on the Coque.... How's that for product placement?

Falco.

Delica Canada | Mitsubishi Van Club

How can i find out if my turbo is working properly.

How can i find out if my turbo is working properly.

Re: How can i find out if my turbo is working properly.

Re: How can i find out if my turbo is working properly.

Re: How can i find out if my turbo is working properly.

Re: How can i find out if my turbo is working properly.

Re: How can i find out if my turbo is working properly.