Found this on the ground after an oil change...

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
kurtiswilk
Posts: 69
Joined: Thu Dec 18, 2014 10:44 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 97 L400 super exceed
Location: Calgary, alberta

Found this on the ground after an oil change...

Post by kurtiswilk » Thu Jul 30, 2015 8:49 pm

hey guys

Did a routine oil change tonight and found this little diddy on the ground after bolting on the skid plate.
Not sure that it came from duncan as the calder pin and washer are all intact. as you see it is how i found it.

Figured i'd get another opinion.
found pin.jpg
found pin.jpg (25.24 KiB) Viewed 981 times
Deli Duncan
97 L400 gen 2

User avatar
Big-Bird
Posts: 1218
Joined: Thu Dec 08, 2011 5:57 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=20974
Vehicle: 96 PE8W Spacegear
Location: Calgary

Re: Found this on the ground after an oil change...

Post by Big-Bird » Mon Aug 03, 2015 2:56 pm

That looks like the linkage pin for the front differential solenoid.

But did you find it assembled like that? If so I doubt it came off by itself.
Yeah I joined the Dark Side because the medical plan is top shelf!

Image

User avatar
johnghaley
Posts: 16
Joined: Sat Sep 28, 2013 10:10 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1997 Space Gear
Location: Port Alberni
Location: B.C.

Re: Found this on the ground after an oil change...

Post by johnghaley » Wed Aug 05, 2015 11:36 pm

If it was found assembled like it was in the photo then I wouldn't worry about it. We use pins like that on pivoting parts on air break systems, not that delica's have those.
John H

kurtiswilk
Posts: 69
Joined: Thu Dec 18, 2014 10:44 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 97 L400 super exceed
Location: Calgary, alberta

Re: Found this on the ground after an oil change...

Post by kurtiswilk » Sun Aug 09, 2015 2:50 am

Thanks Guys,

Found exactly as pictured, figured it was not likely from the delica :)
Deli Duncan
97 L400 gen 2

Post Reply

Return to “L400 Technical”