Delica Canada | Mitsubishi Van Club

I have removed the entire pipe system from both front and rear heater and my L300 runs great. The weather has been 35c-95f and my inline hose temp sensor has read up to 100c-212f on some long mild inclines then stabilises at around 80-85 when highway cruising. I put in a brand new 3 core rad from eb...

I had a 2' straight through system for a while and it was too loud for me. Cops pulled me over and gave me a defect notice for excessive noise along with a couple of other things. I got a resonator put on which did quieten it down a little but it is still quite loud if you floor it. Next time I woul...

Check your viscous fan with the ole rolled up newspaper trick. My L300 was running hot last week, threw a tube of oil in the fan and it fixed her right up.

2wd L300's have straight chassis rails,while 4x4 models have a 45 degree upturn then horizontal towards the front.

Pour a bottle of head gasket sealer in to the radiator and assess.

My mate fit a 90's Mitsy mirage wheel on his L300. Bolted straight on, so I assume other Mitsy models are compatible.

I've been running delo 400 for years. Buying it in 20l drums. Can get 3 oil changes out of it.

I gutted my entire AC along time ago. Front and back. There is a lot of junk to pull output but I don't regret it. Makes for more room in the engine bay, less junk up the front. I even stripped the water lines for the rear heater. I like simplicity.

Tightened my alternator belts up yesterday , they were a little bouncy watching them at idle. Now my head temp is running 3-5 degrees cooler overall. I always hesitated tightening them up because it always felt like a chore. Now I have worked out how to do it all from the engine bay with out too muc...

OBORT OBORT! I just found it in quick links.

Hello, I am wondering if there will be a "new posts" button again? That way I will not miss any threads and new posts.
cheers gez.

I just replaced front heater lines . Bought 4 mertres of 5/8 straight length heater hose.

Blew a head gasket last week so I just replaced that the other day. Rebuilt alternator should be ready on thursday so all will be good again by the weekend.

Make sure you put some extra padding around the hose where it rubs on the alternator bracket , it can wear through over time.

If its 4d56 diesel pretty sure it doesn't have a bleed bolt.
I just run the engine with out the rad cap off for 10-20 mins,that should get rid of any air pockets.