Hi Everyone,
i sold my L300 and got an L400. And i am definitely not mechanically inclined so pardon the ignorance.
Yeah, I got the L400 from a shady dealer. Ugh. Now Japanoid tells me i need to get the alignment done, and that i need to find somewhere with the appropriate computer. They replaced the bearings but say i need to get the alignment done.
Has anyone had it done in or near East Van? Where in Vancouver? Does West Coast Alignment do RHD vehicles?
TIA :)
Alignment in East van?
-
- Posts: 2
- Joined: Fri Feb 22, 2019 10:20 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L400
- Location: Vancouver
- Shaun Van Ramen
- Posts: 324
- Joined: Wed Nov 03, 2010 1:56 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '91 Exceed
- Location: Vancouver, BC
Alignment in East van?
You need to get the alignment specs for you van. Most places only have Cdn based vehicles in their computer systems.
If you can find the specs I think many places should be able to do it. The key word "IF".
If you can find the specs I think many places should be able to do it. The key word "IF".
BAHahahahahahaha
- deskinthewoods
- Posts: 232
- Joined: Thu Mar 08, 2018 10:35 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 L300 Star Wagon named "Wilson"
- Location: Wakefield, Québec
Alignment in East van?
Download the manual in the Technical reference section. The alignment info will be in there under the Steering section probably. Print off the pages you need and any alignment shop will be able to do it.
My dad used to say,"If you can read, you can do anything!"
-
- Posts: 2
- Joined: Fri Feb 22, 2019 10:20 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L400
- Location: Vancouver
Alignment in East van?
thanks deskinthewoods, from a fellow wakefielder (!!)
- deskinthewoods
- Posts: 232
- Joined: Thu Mar 08, 2018 10:35 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 L300 Star Wagon named "Wilson"
- Location: Wakefield, Québec