L400 2nd gen
Where and how to install a pyrometer.
Please and thanks
If you have video
Envoyé de mon iPhone en utilisant Tapatalk
Pyrometer
-
- Posts: 33
- Joined: Fri Feb 17, 2017 11:37 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: None
- Location: Revelstoke
-
- Posts: 17
- Joined: Thu Dec 01, 2016 12:25 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 96 L400 LWB
- Location: N. Vancouver island
Pyrometer
I installed my autometer 2 1/16 pyrometer gauge in replacement of the inclinometer. fits perfect in the same hole in that instrument cluster and just wired it into the existing wires from the temperature gauge.
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.
I can send you some photos of it if you want
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.
I can send you some photos of it if you want
-
- Posts: 23
- Joined: Tue Dec 27, 2016 10:32 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1995 L400 4M40
- Location: Edmonton
Pyrometer
Awesome to know the Autometer 2 1/16 gauges fit perfectly there. I was pondering that myself and just hadn't gone out to measure yet. Thanks for sharing that.
-
- Posts: 11
- Joined: Thu Aug 04, 2016 4:32 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica
- Location: Vancouver
Pyrometer
Avittery wrote:I installed my autometer 2 1/16 pyrometer gauge in replacement of the inclinometer. fits perfect in the same hole in that instrument cluster and just wired it into the existing wires from the temperature gauge.
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.
I can send you some photos of it if you want
I would really like to see some photos if you wouldn't mind! Thanks!
-
- Posts: 17
- Joined: Thu Dec 01, 2016 12:25 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 96 L400 LWB
- Location: N. Vancouver island
Pyrometer
Sorry this took so long! Not entirely sure how to post photos here...
http://imgur.com/a/rwQ1E
http://imgur.com/a/lncgj
http://imgur.com/a/rwQ1E
http://imgur.com/a/lncgj
- Attachments
-
- New Image.JPG (358.73 KiB) Viewed 6733 times
-
- Posts: 33
- Joined: Fri Feb 17, 2017 11:37 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: None
- Location: Revelstoke
Pyrometer
Thank you.
Very helpful.
Envoyé de mon iPhone en utilisant Tapatalk
Very helpful.
Envoyé de mon iPhone en utilisant Tapatalk
-
- Posts: 138
- Joined: Tue Apr 30, 2013 4:15 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1997 L400 Super Exceed PE8W
- Location: Delta B.C.
Pyrometer
Does your inside/outside temperature read out work?
If so, were did you find the temp probes? Or do they come stock and the wiring is included in the connector of wires that plugs into the binnacle?
I have mine but haven't connected it yet so don't know if it works.
I'm looking for a reasonably priced Pyrometer.
Avittery - What did you pay for yours?
If so, were did you find the temp probes? Or do they come stock and the wiring is included in the connector of wires that plugs into the binnacle?
I have mine but haven't connected it yet so don't know if it works.
I'm looking for a reasonably priced Pyrometer.
Avittery - What did you pay for yours?