Need new cam shaft and rocker shaft

Looking for a specific hard-to-find Delica part? Post your request in this section. Commercial postings can be found in "Delica Trader Parts Section".

Moderators: delicanuck, mark

Joshmepp
Posts: 1
Joined: Thu Jan 04, 2018 1:51 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Pajero LWB
Location: Abbotsford

Need new cam shaft and rocker shaft

Postby Joshmepp » Sat Jan 06, 2018 7:37 pm

Hi everybody,

This is my first post.

I recently purchased a non-running 91 LWB Pajero 2.5T.

I pulled the valve cover off and discovered the camshaft was broken in three pieces, as well as the rocker shaft snapped.


I pulled the head off, and luckily no valves were bent in the damage. I've sourced a new head, and plan on assembling it back together with as many of the original parts as I can. I will re-face the original valves and put them back on with the springs. And I plan on using the original rocker arms, but I do need a new rocker shaft, as well as a cam shaft.

Let me know if you have parts, or know where to source them.

Thanks for your time!

Josh

User avatar
Growlerbearnz
Posts: 1805
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Need new cam shaft and rocker shaft

Postby Growlerbearnz » Sat Jan 06, 2018 11:34 pm

Hi Josh,

Just keep an eye on the rocker arms, they're supposed to be sacrificial and I wouldn't be surprised if some of them fail in the near future.
Nothing says "poor workmanship" more than wrinkles in the duct tape.


Return to “Parts Wanted (Non-Commercial)”

Who is online

Users browsing this forum: No registered users and 1 guest