L300 Automatic and Manual = same engine?

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
pattypoo2
Posts: 9
Joined: Fri Oct 30, 2015 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Commando
Location: Nanaimo

L300 Automatic and Manual = same engine?

Post by pattypoo2 » Wed Sep 04, 2019 6:57 pm

Maybe a foolish question but is there any reason swapping an engine from a manual transmission l300 into an automatic would be problematic? Or would work great?

sk66
Posts: 177
Joined: Thu Oct 06, 2016 3:24 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '91 Delica L300
Location: Pennsylvania, USA

L300 Automatic and Manual = same engine?

Post by sk66 » Thu Sep 12, 2019 6:01 am

Should work fine.
Steven
1991 L300
Harrisburg, PA

User avatar
Growlerbearnz
Posts: 2016
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

L300 Automatic and Manual = same engine?

Post by Growlerbearnz » Thu Sep 12, 2019 7:03 pm

^What he said. All same, though you'll have to swap a few minor things from one engine to the other depending on which direction you're going. Flywheel/flex plate, kickdown linkage, ... err... I think that's it actually!
Nothing says "poor workmanship" more than wrinkles in the duct tape.

pattypoo2
Posts: 9
Joined: Fri Oct 30, 2015 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300 Commando
Location: Nanaimo

L300 Automatic and Manual = same engine?

Post by pattypoo2 » Fri Sep 13, 2019 8:12 am

Excellent. Thank you

Post Reply

Return to “L300 Technical”