Delica Canada | Mitsubishi Van Club

Kamil
You have a keen eye and a great camera with rich colours. The pics are superb, enough for me to want to make a trip there. Love your gators too!
Enjoy
Wayne
TLGF

David
Don't think my propane heater would fit with your awesome design. The heater mounts in the passenger side rear window. Sorry
See you at the meet
Wayne
TLGF

David
Yup it's in and running. Show you at the meet.
Wayne
TLGF

Merry Christmas
Can't miss this one. I want to see fexlboi(s) sound and heat insulation. Also Falco(s) GPS system. Lots of goodies to see!

Wayne
TLGF

Guys A propane heater is fine if it is a direct vent heater. :-D :-D This type draws combustion air from the outside and preheats it with (propane) exhaust heat increasing the units efficiency. The unit is sealed, safe and draws no inside air while venting exhaust products to the outside. My heater ...

Guys
We'll have to plan that trip again in the spring. Busy time of the year.
Bassn.. you might see snow on your trip, but have fun. I'm fishing on the Squamish R. Saturday.
Wayne
TLGF

Yup the gasket was installed and the hubs were well greased when I installed them. They're okay now. I've talked with a few non deli 4X4ers that have had their hubs seize up.

I echo their advice . Engage them frequently.

TLGF

Jesse
Lets meet for coffee in Mission at 7:30 at Tim Hortons- 33291 1st ave. Anyone else interested??

Google the Timmys location, easier than explaining. It's only a block off the beaten path and 2 hours away from the hot springs. Other meet locations??

Wayne
TLGF

Original..
Try a Chrysler or Dodge parts counter. Both engines are used in their cars and trucks. Check the flywheel bolts first, some are 7 and some 8 bolt. There are very few 2.4 gassers this side of the border in delicas. 3 I know of.
Good luck
Wayne
TLGF

Guys n Gals I need a passenger too.
Wayne
TLGF

jesse http://bb.bc4x4.com/showthread.php?105621-clear-creek-hot-springs http://bb.bc4x4.com/showthread.php?140369-Clear-Creek-hot-springs-open elevation 2960 ft, may be below the snow but it was down very low Thursday. What day are you going. I can get away Sunday morning. Bring a bathing suit Wayne...

Rich I like your explanation, especially the fire breathing part. it makes too much sense now. Ursula I was very good with bicycles but gave up on my L300 when I followed the two wires concerned. They turned into coaxial wiring so I stopped searching. The light never worked when I sold it. I believe...

Fexilfelix
If your wooden windows are thinner than the glass window you should install a shorter screw in the back hinge assembly. that will pull the window in slightly and may solve your leak problem. I ran into that problem with my window.
Wayne
TLGF

Guys My manual hubs froze up on me recently just when I needed them. :-( :-( Later I worked them loose, took them apart and oiled them. The drive shafts inside were wet also. Don't wait till you need them, engage them frequently. I'm made up a little tool to assist engaging the hubs. Sometimes it's ...

BN
4 LED's and spots too. Nice day and night time lighting.
Wayne
TLGF