very tired of searching

[jmac4u]

Hi all:
I will cut to the chase need manual hubs badly as my 91 Delica is a work van and had to be towed twice.Anyone that has a set to sell please pm me or phone 250-318-0610.Snow is here,
i have tried superwinch but they have discontinued the hubs i need.My 1991 Delica exceed is a 5 speed standard.

[delicat]

Hello,

Have you tried with Summit Racing? Here's a link that might help you. Good luck!
http://www.summitracing.com/parts/SPW-4 ... toview=sku

[fishslapper]

Too bad it says they are not available !

[jessef]

Why did your van have to be towed twice ?

What do the hubs have to do with it ?

[delicat]

Too bad it says they are not available !

Where are my glasses?

[jmac4u]

Had to be towed because we have snow up higher and no 4 wheel drive,still wanting hubs so if anybody has a extra set please call....john

[jessef]

Superwinch discontinued them.

Looks like you're in the same boat as everyone else looking for them. Have to search online until you find a retailer that still stocks them.

[asorensen]

OR you could phone around to some of the parts suppliers. I am thinking CC autos etc. and get you self some flanges to permanently lock the hubs. Which would allow you to use your four wheel drive for the winter time. I am also thinking there might be some users which might part with theirs after they replaced them with manuals.



Good luck

Andy

[jmac4u]

Hi All:
Well i tried eveything i could to find manual hubs with no luck.So my new plan of attack is to see if anybody has auto hubs i have one good one the other is shot.If you have what i'm looking for please call or pm me..john 250-318-0610....thanks

[Erebus]

Hi All:
Well i tried eveything i could to find manual hubs with no luck.So my new plan of attack is to see if anybody has auto hubs i have one good one the other is shot.If you have what i'm looking for please call or pm me..john 250-318-0610....thanks

I've got a set of auto hubs I removed when I put in the Superwinch manual hubs. Nothing mechanically wrong with the auto hubs. I'm in Calgary, AB. Will send PM too.

[TardisDeli]

Hi Jmac4U, I recommend you accept offer from Erebus in Calgary. He treats his Deli nicely (we know as he has visited us a couple times and gone off-roading with the group), and if he says his auto hubs are in good condition then they will be so.

Make sure when you work on them that the little circular spring clip does not get bent or lost...very gently pry it out, it sits inside to press against the outer edge of the hub cover, is a very thin circular clip about 3 inches across, and is hard to see... as they are very hard to get replacements. I recall someone posted a how-to-hubs on this site.

If you need anything else sourced here and sent to you, just ask me, am happy to check with the local delica shops for you. If you come to Vancouver, you are welcome to stay at our house in Burnaby.

Sorry you're having such a tough time, wish you were closer so we could have a delica meet for you with everyone helping you. Keep in touch, and ask questions, PM me if you need me to ask around for answers.

Regards, Christine.

[snelson]

Holy crap - a pair of Superwinch's just sold on ebay for 165 American - that's seems like a lot of coin?

[jmac4u]

Thanks!!!!
I must thank jfarsang, christine,and all others who offered there help and most of all erebus who i will phone tuesday....john

[jessef]

Holy crap - a pair of Superwinch's just sold on ebay for 165 American - that's seems like a lot of coin?

Not really.

They were retailing between 110 and 165.

Now that they are discontinued, people are willing to pay a bit more to get a good product.

[Erebus]

John,

When you are installing them, follow the instructions Jesse posted in the thread http://www.delica.ca/forum/superwinch-m ... -4437.html Granted, those are how to remove stock auto, put in manual hubs, but should give you enough info.