Lower Control Arm
-
bassnailer
- Posts: 306
- Joined: Mon Jun 09, 2008 7:53 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '92 L300 Super Duper Exceed
- Location: Vancouver
- Location: Vancouver
Lower Control Arm
Anyone know where I can find one?
-
Rising Sun Auto Import
- Posts: 1366
- Joined: Sat Nov 08, 2008 10:45 pm
- Vehicle: dealer#31128, L400 super exceed
- Location: New Westminster, BC
- Location: New Westminster, BC
- Contact:
Re: Lower Control Arm
Email me what exactly you need.bassnailer wrote:Anyone know where I can find one?
Steven
Rising Sun Auto Import Inc.
**Ultimate Home of Delica in North America**
**Korea D4BF( 4D56 ) Complete Engine & New Block Import &Installation**
Delica Injection Pump Rebuilt, Cold Start & Engine/Turbo Work Specialist
Unlimited source for new & used parts
**Ultimate Home of Delica in North America**
**Korea D4BF( 4D56 ) Complete Engine & New Block Import &Installation**
Delica Injection Pump Rebuilt, Cold Start & Engine/Turbo Work Specialist
Unlimited source for new & used parts
-
mdrive
- Posts: 528
- Joined: Tue Nov 07, 2006 3:09 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Location: Richmond, BC
- Contact:
Re: Lower Control Arm
We sell complete lower control arm with bushings installed. Brand New $ 180.00
MAXIMUM OVERDRIVE AUTO IMPORTERS
4-7900 RIVER ROAD, RICHMOND, BC V6X1X7
TEL: 604-726-3109 Email: Sales@maxoverdrive.ca
For Vehicles visit: http://WWW.MAXOVERDRIVE.CA
For Online Parts Store, visit:http://www.maxoverdrive.ca/parts/.
-
jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: Lower Control Arm
Is it your bushings or did the arm crack?
From what I've seen most of the parts dealers have used/new one's so pick your flavor.
If you try to replace the bushings yourself, you're in for world of new foul language. Attempted it twice and succeeded once. Never again but if you must, have a shop with a proper press re&re them.
From what I've seen most of the parts dealers have used/new one's so pick your flavor.
If you try to replace the bushings yourself, you're in for world of new foul language. Attempted it twice and succeeded once. Never again but if you must, have a shop with a proper press re&re them.
-
bassnailer
- Posts: 306
- Joined: Mon Jun 09, 2008 7:53 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '92 L300 Super Duper Exceed
- Location: Vancouver
- Location: Vancouver
Re: Lower Control Arm
it's just the bushing. But I figured, with 250K on the van, I may as well get an entire new arm.