Dead then Alive Temperature guage

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
Yokohama
Posts: 207
Joined: Tue Jan 27, 2009 4:06 pm
Member's Photo Album: http://www.delica.ca/Photos/

Dead then Alive Temperature guage

Post by Yokohama »

I have a 1990 P04W. The temperature gauge was working when I shut it off, then it was not working for 3 or 4 days, after that it started working again. I checked the sensor by shorting the wire that connects to the sensor to ground (lower resistance) and the gauge did not move at all.
Since the circut to the dash temperature gauge is simple, I suspect that there is a problem with the connectors, wire, or the gauge in the dash.

Has anyone else had this problem? Was there a particular area in the harness that I should look at?
Whenever On-Road and off-road; on duty and off duty, it is DELICA Moment. -CMC

"Practical vehicle fitting wide occasion from personal use to commercial use.
Many can ride / many can be loaded." -Official Mitsubishi L300 product website
Top
Post Reply

Return to “L300 Technical”