Looking for an EGR blanking plate kit

shealy · Post by **shealy** » Thu Sep 29, 2011 4:14 pm

Hey, I've been looking at the posts for EGR blanking, but haven't been able to find any for sale. (Apparently this site won't let me search the word "EGR"...) Anyways, just wondering if anyone out there (dealers included) have these kits for sale, and how much are they? Thanks!

Also, I saw someone remove the whole EGR, and on one side install a pyrometer - is there a kit for this too, or is that a custom job?

-Steve

trecar · Post by **trecar** » Thu Sep 29, 2011 7:02 pm

Get a hold of richd, he hooked me up with mine, his email is on the forum.

nvanadm · Post by **nvanadm** » Thu Sep 29, 2011 7:33 pm

RichD sells the kits. If you just want the blanking plates you can get them off eBay for a good price.

Jensen · Post by **Jensen** » Fri Sep 30, 2011 7:18 pm

wow... I should spend more time on the forum...

shealy · Post by **shealy** » Fri Oct 07, 2011 9:40 am

So after trying to email Richard D A few times and having my emails largely ignored for the most part, I'm still out of luck. I guess he's not that interested in selling kits? Anyways, any other options for places or people to get an egr removal kit from around vancouver area? Otherwise I'll probably hit up one of the kits on eBay. On that note, if you search "delica egr" on eBay, there's a few kits (all slightly different), any recommendations? Anyone out there ordered one of these before???

shealy · Post by **shealy** » Fri Oct 07, 2011 4:18 pm

So after a few emails to Rich D (which mostly went ignored), I got the impression he doesn't want to sell egr removal kits. Anyways, this puts me back to square one: anyone know of any other people or places that would sell this kit in vancouver area? I'll probably have to resort to ordering a kit off eBay, which brings me to my next question: if you search "delica egr" on eBay, there seems to be a few slightly different kits. Anyone have one of these kits or recommend a certain one??? Thanks again for suggestions!

dennis_lambert · Post by **dennis_lambert** » Fri Oct 21, 2011 12:23 pm

Hi there I have some plates for sale...They are water jet cut out of 1/4" plate steel and ceramic paint coated.$12 for two plates so you can completly remove the EGR.
Shipping will be free to lower mainland

http://nomadjdmautopartsca.ipage.com/modifications.html

Delica Canada | Mitsubishi Van Club

Looking for an EGR blanking plate kit

Looking for an EGR blanking plate kit

Re: Looking for an EGR blanking plate kit

Re: Looking for an EGR blanking plate kit