hi
the filter has 4 ports. looks like two are IN and two are OUT. which is which? has anybody assembled the primer pump on your FM100?
Stanadyne filter FM100 questions
Moderator: BCDelica
-
after oil
- Posts: 1436
- Joined: Mon Feb 11, 2008 7:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 cham-reimo poptop L300. 78MB240D
- Location: on the road
- Location: occupied coast salish territory aka powell river
-
Jordan
- Posts: 198
- Joined: Fri Dec 04, 2009 8:47 pm
- Vehicle: 89 low roof L300
- Location: Nelson, BC
- Contact:
Re: Stanadyne filter FM100 questions
I don't have the primer pump but for the housing I think there is an 'in' and 'out' on each side with little arrows on the top, plug 2 of them or you can put a vac gauge on the extra 'in' to monitor filter life.
-
after oil
- Posts: 1436
- Joined: Mon Feb 11, 2008 7:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 cham-reimo poptop L300. 78MB240D
- Location: on the road
- Location: occupied coast salish territory aka powell river
Re: Stanadyne filter FM100 questions
thanks
i found a good image of the primer pump to see i had it right. good idea on the gauge. im gonna thread a heater in to there.
i found a good image of the primer pump to see i had it right. good idea on the gauge. im gonna thread a heater in to there.
-
Jordan
- Posts: 198
- Joined: Fri Dec 04, 2009 8:47 pm
- Vehicle: 89 low roof L300
- Location: Nelson, BC
- Contact:
Re: Stanadyne filter FM100 questions
Where do you have your filter mounted? The primer has intrigued me but I would have to refigure some things as I have no clearance above the filter.
-
after oil
- Posts: 1436
- Joined: Mon Feb 11, 2008 7:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 92 cham-reimo poptop L300. 78MB240D
- Location: on the road
- Location: occupied coast salish territory aka powell river
Re: Stanadyne filter FM100 questions
its in the battery compartment. there is only one battery in there, one of the two side by side style