Inclination meter/electronic locking on side door

Mitsubishi Delica L400 production commenced in 1994 -- After much anticipation, the L400 arrived on Canadian Soil in 2009!
Post Reply
User avatar
Spade J
Posts: 33
Joined: Tue Dec 08, 2009 1:40 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SuperExeed SWB

Inclination meter/electronic locking on side door

Post by Spade J »

Hi

Seems my Inclination meter isn't moving at all and I have read about it somewhere in the forum probably from different forum but I have no luck finding it again. Can anybody help show me how to loose the ball inside?

Second, I have noticed electronic locking does not work on my sliding door as it works on both front doors, I suspects it may be weak or no signal contact.
Cheers

Spadelica
94 L400 Super Exceed
User avatar
DelicaFreaka
Posts: 113
Joined: Sat Oct 03, 2009 9:03 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 4M40
Location: Okanagan B.C.

Re: Inclination meter/electronic locking on side door

Post by DelicaFreaka »

Maybe this will help you............Kirk out.

http://www.delicaclub.com/viewtopic.php?t=4512
********** Starship Delica **********
"To boldly go where no man has gone before"
Image
Green1
Posts: 3257
Joined: Wed Jul 19, 2006 9:18 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1994 L400 Royal Exceed PF8W
Location: Calgary Alberta Canada
Contact:

Re: Inclination meter/electronic locking on side door

Post by Green1 »

As the general consensus appears to be that I do not know what I'm talking about, and cause more harm than good, I am removing this post so that others are not tricked in to following my ill-advised instructions.
Last edited by Green1 on Sun Jun 06, 2010 11:01 pm, edited 1 time in total.
User avatar
Spade J
Posts: 33
Joined: Tue Dec 08, 2009 1:40 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 94 L400 SuperExeed SWB

Re: Inclination meter/electronic locking on side door

Post by Spade J »

Thanks, I got sliding door locking working by cleaning the dirt off and add some lubrication for springer.

The ball is moving freely inside after few tapping during stereo swap. It got some air pocket inside but since it is moving and working so I ll leave it as is.

Many thanks.
Cheers

Spadelica
94 L400 Super Exceed
Post Reply

Return to “L400 Technical”