Rear shocks for a 91 L-300

[ALEXANDER]

I've looked all over for a North American name and part number for Rear Shocks with out much success!
Well, I went out to a local delica repair shop and bought some although I was hoping to buy "Jobber".

So to help anybody else out who may be searching..........

Monroe Sensatrac Part # 37074ST

Hope this helps someone or atleast you can cross-reference it!

[fexlboi]

Thanks for letting us know. You don't need to look all over NA. Delica.ca is the only place you need to search. :)

This are the numbers for ProComp shocks most of the people use:

Front: 313515 or 913515
Rear: 319520 or 919520

ProComp part numbering system :

319520 --- 1st number: This will either be a '9' or a '3' indicating if it is an ES9000 (gas charged) or an ES3000 (hydraulic)

319520 --- 2 to 4th numbers : Shock stroke length. 195 = 19.5" inches

319520 --- 5th number: Mounting type. 0 = eye top/eye bottom / 1 = pin top/eye bottom / 2 = eye top/pin bottom / 3 = pin top/pin bottom

319520 --- 6th number: Bushing/spacer kit that comes with each shock.

[loki]

Thanks for letting us know. You don't need to look all over NA. Delica.ca is the only place you need to search. :)

This are the numbers for ProComp shocks most of the people use:

Front: 313515 or 913515
Rear: 319520 or 919520

ProComp part numbering system :

319520 --- 1st number: This will either be a '9' or a '3' indicating if it is an ES9000 (gas charged) or an ES3000 (hydraulic)

319520 --- 2 to 4th numbers : Shock stroke length. 195 = 19.5" inches

319520 --- 5th number: Mounting type. 0 = eye top/eye bottom / 1 = pin top/eye bottom / 2 = eye top/pin bottom / 3 = pin top/pin bottom

319520 --- 6th number: Bushing/spacer kit that comes with each shock.

and if you want another brand most places can crass reference these part numbers with other brands.

[sigurross]

I've looked all over for a North American name and part number for Rear Shocks with out much success!
Well, I went out to a local delica repair shop and bought some although I was hoping to buy "Jobber".

So to help anybody else out who may be searching..........

Monroe Sensatrac Part # 37074ST

Hope this helps someone or atleast you can cross-reference it!

Thank you for posting this. These shocks fit like a glove!

[yojimbo]

and if you want another brand most places can crass reference these part numbers with other brands.

Yeah I've met some guys in parts stores that will do that, I tend to avoid them afterwards.

[dr_airtime]

Can anyone confirm that the procomp shocks mentioned above in this thread are for a stock L300, not one with the 2" lift conversion?

Front: 313515 or 913515
Rear: 319520 or 919520

There are a couple other threads talking about Procomp shocks, and they are generally referring to 2" lift L300's so there is no definite answer on the forum in my opinion.

In the 2" lift thread below they mention the series above as well:

http://www.delica.ca/forum/pro-comp-sho ... 12679.html

[Growlerbearnz]

I have 913515's and 919520's on my L300, which has the 2" lift blocks at the front and no rear seats (which lifts the back by about 2").

[Lapprentis]

I did some research about situable Bilstein without having to add a block on eye to eye shocks. here is the answer I received from an internet seller for my request about a pin to eye Bilstein rear shocks to be used with a 2inches lift kit:
From what I can find online it looks like the lifted Procomp shock (# 921520) has dimensions as follows:

(From what I can find online it looks like the lifted Procomp shock (# 921520) has dimensions as follows:
extended 21.75"
compressed 13.06"
with a stem at one end and eyelet on the other
Bilstein has a 5125 series shock (# 33-230450) with the following measurements:
extended 22.88"
compressed 14.32"
with a stem at one end and eyelet on the other)
So my question now is, if the procomp 921520 are OK with the 2 inches lift kit, would the one inch longer Bilstein fits ?
Lapprentis