Fuse able Link - posted picture now

Does your Mitsubishi L300 make a strange noise? Need wheel alignment specs?
Post Reply
User avatar
dfnder
Posts: 526
Joined: Wed Mar 05, 2008 9:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: '91 Exceed
Location: Squamish

Fuse able Link - posted picture now

Post by dfnder »

]I have heard the term here on the site but never really could picture what it was. While installing my new battery I was missing one connection and saw a broken wire. This wire seems pretty brittle and I noticed there is another one near the battery. Is this what is referred to as the fuseable link?
[attachment=0]photo.JPG[/attachment
Attachments
photo.JPG
photo.JPG (24.01 KiB) Viewed 17325 times
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Re: Fuse able Link - posted picture now

Post by Growlerbearnz »

Yup, that's a fusible link all right. Looks like it's done its job too. (Sometimes the insulation frays when it rubs, and when it eventually shorts out it blows the fuse even if there's no fault in the circuit.)
Nothing says "poor workmanship" more than wrinkles in the duct tape.
User avatar
TardisDeli
Posts: 1425
Joined: Tue Sep 18, 2007 10:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300. 1997 L300.
Location: Burnaby
Location: Burnaby, Gaglardi freeway exit
Contact:

Re: Fuse able Link - posted picture now

Post by TardisDeli »

Hi Dfender, drop by our house after work.

That fusable link is not the main one that we mention. Your photo looks like one the flops near the main one, just above the battery, with only one wire going ina and out, I forget exactly what is does but if will prevent the L300 starting at times (so maybe its to battery, or fuel, or fuel pump, a safety switch, or something else serious)...yes it dies with brittle old age, just cut the wires back and install an inline fuse (I can go look at mine for the correct fuse rating) do with with battery disconnected --- zap ouch, start cpr.

The actual fusable link is black plastic, bigger than your photo, with 4 larger diameter wires going out then in again. Each of the 4 wires protects a quarter of the vehicle, geographical quarter ie front right vs left rear etc. The wire melts with short circuit, cheaper than a glass and metal fuse with fuse holder.

Are you having serious problem, do you want me to visit squamish.

Christine.
Christine
Of The TardisDeli My TardisDeli travels thru time and space. Our house is nicknamed the TardisDeli Motel, as so many delii owners visit to share delii stories.
User avatar
after oil
Posts: 1436
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

Re: Fuse able Link - posted picture now

Post by after oil »

TardisDeli wrote:yes it dies with brittle old age, just cut the wires back and install an inline fuse (I can go look at mine for the correct fuse rating) do with with battery disconnected ---
Christine.
Greetings Christine!
What is the amperage of the inline fuse you installed in place of the floppy fusible wire?

Ari
Overlanderjay
Posts: 72
Joined: Wed Sep 25, 2013 10:02 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Ford E350 Econodeli powerveg
Location: Maple Ridge, B.C.
Location: Maple Ridge, B.C.

Re: Fuse able Link - posted picture now

Post by Overlanderjay »

Try around a 25Amp fuse.
"Electrickery Technition"
User avatar
after oil
Posts: 1436
Joined: Mon Feb 11, 2008 7:01 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 92 cham-reimo poptop L300. 78MB240D
Location: on the road
Location: occupied coast salish territory aka powell river

Re: Fuse able Link - posted picture now

Post by after oil »

Nope 30a blows. Needs more.
Overlanderjay
Posts: 72
Joined: Wed Sep 25, 2013 10:02 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Ford E350 Econodeli powerveg
Location: Maple Ridge, B.C.
Location: Maple Ridge, B.C.

Re: Fuse able Link - posted picture now

Post by Overlanderjay »

Then i would go with a circuit breaker ,take a look at Blue sea products at either Steveston marine or West marine
"Electrickery Technition"
Post Reply

Return to “L300 Technical”