Well went to turn on the a/c today sitting in traffic and nothing. So drove home and started looking about 10min later I came to the conclusion the refridgerant leaked out. So I am going to jam in some redtek try to find the leak if it is a minor will fix if it is a major then the Air compressor project will commence with the A/C electric fan put on a switch for extra cooling power on hot slow days. Will be about a week before the answer is clear keep in touch.
Dustin
A/C woes
-
legionnair
- Posts: 279
- Joined: Fri Aug 26, 2011 7:05 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: delica L300
- Location: van island
A/C woes
Measure it twice, cut once. Dam still cut wrong
-
legionnair
- Posts: 279
- Joined: Fri Aug 26, 2011 7:05 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: delica L300
- Location: van island
Re: A/C woes
Well, turned out to be a faulty oring. Recharged and ready yo keep the family cool.
Will have to invest in onboard air system. But first I have to finish my expedition trailer
Dustin
Will have to invest in onboard air system. But first I have to finish my expedition trailer
Dustin
Measure it twice, cut once. Dam still cut wrong
-
TardisDeli
- Posts: 1425
- Joined: Tue Sep 18, 2007 10:57 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 L300. 1997 L300.
- Location: Burnaby
- Location: Burnaby, Gaglardi freeway exit
- Contact:
Re: A/C woes
Just finished building A expedition deli trailer also ,post some pictures of yours would like to see them. Cheers Jay Tardis Deli
Christine
Of The TardisDeli My TardisDeli travels thru time and space. Our house is nicknamed the TardisDeli Motel, as so many delii owners visit to share delii stories.
Of The TardisDeli My TardisDeli travels thru time and space. Our house is nicknamed the TardisDeli Motel, as so many delii owners visit to share delii stories.
-
legionnair
- Posts: 279
- Joined: Fri Aug 26, 2011 7:05 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: delica L300
- Location: van island
Re: A/C woes
Right now not much to see just a skeleton or angle iron. Trying to get my hands on a CVT Mt. Hood. I am going to put its skin on half checker plate half plastic sheet. Then the fun of building the out side kitchen and solar charger, propane fridge. Etc.. winter long project.
I will post pics and start a build thread when I am a bit further along. It based on a 4x8 ATV trailer, with the angle skeleton I can easily lift one side off the ground by the fender. So I hope when done not loaded will be about 1000lbs.
Dustin
I will post pics and start a build thread when I am a bit further along. It based on a 4x8 ATV trailer, with the angle skeleton I can easily lift one side off the ground by the fender. So I hope when done not loaded will be about 1000lbs.
Dustin
Measure it twice, cut once. Dam still cut wrong