Found a broken wire leading from the harness that goes to the batteries etc, to a micro switch on the IP, it looks like at the far end of the throw of the throttle linkage. Nothing is running abnormally, I havent tried AC yet, anyone know what the wire is for? I had wondered when that wire was going to let go, as it always looked really loose. I will probably replace that section of wire and molex plug with a splice and a couple of knife connectors.
I just tried to add a picture of what I am talking about, but its not letting me saying my picture can only be up to 960 pixels wide. I just resized down to a tiny little useless picture and it still gave me the same warning. I will post this and try and edit it with the pic later
EDIT:
http://i1124.photobucket.com/albums/l56 ... 132157.jpg
Still not letting me post pictures saying they are too big