Delica Canada | Mitsubishi Van Club

Hello, I need help. I bid on a vehicle in Japan. It is a 4.5 /A/B on the auction sheet. There were no notes on the auction sheet. I won the bid, only to find out that it does not start because of a dead battery and alternator that is not charging. I have asked to return the vehicle to auction, and I...

Yep, I would sell them seperatly.

NOT much, the gutter brackets would need to get ligned up again. I had to bend them in for the L400.

Selling two Aluminium Tanks that were custom welded to fit under a long wheelbase L400 Delica. They also come with mounting brackets and internal coolant fed heaters. You can see the construction and internals for it at: http://www.delica.ca/forum/also-triple-tanking-it-in-the-l400-some-photos-up-77...

Selling an aluminium Custom Roof rack that is super light and super tough. It does not whistle when driving and has a sunroof cut out. It also can mount aluminium bars for mounting boats etc. I have also put a 4X 8 sheet of plywood on it and slept up there in a tent for the extra views! It was origi...

Thanks,

Good idea,

Where is it????

Asking for some theories for where to start looking. Currently van engine will not turn off unless I block air intake. History: 1) Van is L400, converted to WVO. 2) recently (Less than a week) van was not accelerating at start from a stop. Engine idling and starting without any issue, but when I ste...

I installed three tanks in my L400 for WVO and Diesel. I used a siphon system to regulate the two WVo tanks. Mine works great. The rules for a siphon system to work are as follows: 1-The height of the pick up needs to be the same 2- The distance between the two tank fuel lines to the connection T ne...

Ah shit is this harassment?

yes, I'll get to it!

I have cleared out the lines for the WVO side and have also increased my idle speed to about 500-600 RPM. The WVO does not stall out now at any time. It still starts very rough when I park a short while in wvo (engine Hot still). I am still getting a stall when I am in purge or just starting Diesel ...

Hi all,

The right hand window motor of my l400 just kicked the bucket. I tried to install an L300 motor, but it did not have the same bolt pattern. So back to square one. Anyone have a replacement working motor or know where I can get one???

Thanks

Today, tried putting clear tube between vegtherm and valve, where only WVO is when turned on. Kept vegtherm off and ran it to see if any bubbles where visible. None were. Some suction on hose though. WVO was at 48 C.

So the system is installed in the L400. I have two dedicated WVo tanks , a small Diesel tank and three three port valves to do direct return to deisel, to WVo during purge and to loop return while running WVo. I am using a vegtherm Max and the veg filter from Plantdrive. My problem is that the engin...

Hi Jeff,

Can I use the stock shocks with the Lift Kit #6? Will it affect the ecs? When do you get them in? Any idea on cost?

Thanks

I was just looking at the 4M40 manual in L400 Delica Downloads and you know ~ they go pretty extensively into the cooling system. Thanks, took a look. It tells me about the engine,which will help finding the hottest water for the heated filter. But not about anything leaving the engine bay, to rad ...