Delica Canada | Mitsubishi Van Club

Like the title says.. these are 4x4's ... show your Delica's flexing !

All form of Delica's welcome

What kind of lift does that have on it? Doesn't look like the kind of flex I get out of the stock Deli...

My recently sold L300 before it was lifted. About the maximum articulation possible. This was at Stave Lake, BC... My new L400. Not so much "flex" but showing maximum departure angle or backwards approach angle depending which way you are driving Taken over the Christmas holidays in Sechelt, BC Tons 'o' fun!

nxski wrote:What kind of lift does that have on it? Doesn't look like the kind of flex I get out of the stock Deli...

Just a 2" lift with 31" tires

Nice flex on the rear guys, still trying to find it at the front though...

Delica's have Flex?? You sure?

Here is a picture of mine pre-me owning it showing off it Flex.

This is bumper flex! (This is why mine has the bed slide and tire moved behind the back axle).

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/HfftfnsK8pY&fs ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/HfftfnsK8pY?fs=1&hl=en_GB" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>[/youtube]

That flex and departure angles has me wondering where I should install extra back up lights on my L400. Looks like they'd be torn off under the rear bumper. Any ideas??
Wayne
TLGF

Did a little trip today and remembered seeing your post Jesse. I found an okay spot but it needed to be a bit higher to get the max flex...she had more to give! Now for $1 can anyone guess where this was. Hint #1 is that it is in the Southern Vancouver Island area.

Looking Eastish Looking Westish -Mark

thedjjack wrote:Delica's have Flex?? You sure?

Here is a picture of mine pre-me owning it showing off it Flex.

This is bumper flex! (This is why mine has the bed slide and tire moved behind the back axle).

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/HfftfnsK8pY&fs ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/HfftfnsK8pY?fs=1&hl=en_GB" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>[/youtube]

Did you find that gem after the purchase?


I always wonder if one of us has this rig: http://www.youtube.com/watch?v=Ld6c0xiVS5I

or if they have had a similar past...

Jordan wrote: Did you find that gem after the purchase?

No I saw it during negotiations help with the price. There was no real damage other then bent bush guard and a dent in the bumper. Frame ect... all fine.

Jordan wrote:

thedjjack wrote:Delica's have Flex?? You sure?

Here is a picture of mine pre-me owning it showing off it Flex.

This is bumper flex! (This is why mine has the bed slide and tire moved behind the back axle).

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/HfftfnsK8pY&fs ... ram><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/HfftfnsK8pY?fs=1&hl=en_GB" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>[/youtube]

Did you find that gem after the purchase?


I always wonder if one of us has this rig: http://www.youtube.com/watch?v=Ld6c0xiVS5I

or if they have had a similar past...

I wonder about this one... http://www.youtube.com/watch?v=evKmc8ma ... r_embedded (Falco, this time I intended to not embed it so as not to take up too much space)

jfarsang wrote:

nxski wrote:What kind of lift does that have on it? Doesn't look like the kind of flex I get out of the stock Deli...

Just a 2" lift with 31" tires

Is this the same lift I bought off of you? If so I'm very excited to install it. If not I'm still very excited

nxski wrote:What kind of lift does that have on it? Doesn't look like the kind of flex I get out of the stock Deli...

jfarsang wrote:Just a 2" lift with 31" tires

nxski wrote:Is this the same lift I bought off of you? If so I'm very excited to install it. If not I'm still very excited

Roger that.

DelicaMark wrote:Did a little trip today and remembered seeing your post Jesse. I found an okay spot but it needed to be a bit higher to get the max flex...she had more to give!

IMG044 (640x480).jpg

IMG045 (640x480).jpg

Now for $1 can anyone guess where this was. Hint #1 is that it is in the Southern Vancouver Island area.

Looking Eastish

IMG046 (640x480).jpg

Looking Westish

IMG047 (640x480).jpg

-Mark

Road between Lake Cowichan and Port Renfrew??

Here's a few pictures of my old beloved Mitsushi showing off her flex and departure angle.
And who ever said Falco was hard headed was quite right indeed! And here's a few from a L400 while on one of our outings: As you can see there's almost no flex at the front...