Delica Canada | Mitsubishi Van Club

Do it....

DelicaDJ wrote:My name is Dan, I live south of Vancouver, & I have been lurking on this forum for about a month or so, & am absolutely aghast that the US will NOT allow these awesome vans in!! I want an L300 SO bad...

How far "south of Vancouver"? I'm guessing 48-something degrees North, in a province-like-region that's pronounced "Washington"?

If the answer is yes, you can thank the muscle cars of the 70s - there were afraid of a European invasion of better performing cars...

mararmeisto wrote:

DelicaDJ wrote:My name is Dan, I live south of Vancouver, & I have been lurking on this forum for about a month or so, & am absolutely aghast that the US will NOT allow these awesome vans in!! I want an L300 SO bad...

How far "south of Vancouver"? I'm guessing 48-something degrees North, in a province-like-region that's pronounced "Washington"?

If the answer is yes, you can thank the muscle cars of the 70s - there were afraid of a European invasion of better performing cars...

You are absolutely correct! I think the Diesel GM fiasco of the 70's/80's scared them away from Diesels for a while, too...

http://www.nhtsa.gov/cars/rules/import/ ... isplay.pdf maybe I can do this?

Here's the closest I could find to the L300 Delica...
http://wilmington.craigslist.org/cto/1952602078.html

DelicaDJ wrote:Here's the closest I could find to the L300 Delica...
http://wilmington.craigslist.org/cto/1952602078.html

buy that van, buy a delica, put the delica running gear and motor in that van and walla!

Hi Guys, it is difficult to Assimilate the 2 vans into one, Glen tried it, almost impossible even with his experts. Interior subfloor differs, so the body doesnt swap in. The underframes are not the same, thus cutting and welding was hard as nothing lined up to weld together. Because the frames differ, just trying to put the engine in meant making all new area to bolt the engine and the gizillion bits onto. Transmission doesnt fit into the hole. Where to put the steering system so it can link up to the other stuff. Yeah, I know it looks easy, and we crawled around the 2 vehicles side by side beforehand with great excitement, and envisioned what to do, which parts to take from each vehicle, it all appeared very workable, but when the actual cutting started then the problems became evident. Sad, so sad. Christine and Jay.

I frickin' hate NHTSA right now!Maybe I can become a JDM importer in the US...

Hmm Buy a L300 white and black and cut and
weld the numbers into the appropriate spots ;)

FS


p.s. you know im kidding ,,, right?

Of course! You know, I honestly think the US needs to stop trying to suppress imports... Lots of foreign companies & importers have fled the US because of the ridiculous safety requirements/emissions laws here.

DelicaDJ wrote:My name is Dan, I live south of Vancouver, & I have been lurking on this forum for about a month or so, & am absolutely aghast that the US will NOT allow these awesome vans in!! I want an L300 SO bad...

Read these

http://www.delica.ca/forum/importing-a- ... -7484.html

http://www.delica.ca/forum/import-to-the-us-3293.html

Read those :)
Got any room for a new resident up there? ;)

I have a curiosity question... Would you allow a relative stranger from the US sans Delica to come to a get-together up there, to get to know the rest of the forum, check out the Delicas, Pajeros, ETC?

DelicaDJ wrote:I have a curiosity question... Would you allow a relative stranger from the US sans Delica to come to a get-together up there, to get to know the rest of the forum, check out the Delicas, Pajeros, ETC?

Only if you learn Canadian English first.

Of course you can attend! Just because you don't have a vehicle doesn't mean you can't come look at all of ours. And all the things you'll learn from attending will get you ready for the '85s that'll be available to you for next year, or the '86s for 2012.