Page 1 of 1

Looking for 4D56 engine for a 91 delica

Posted: Sun Mar 14, 2010 2:14 pm
by tyler.heather
Hey everyone,
I'm looking for an engine for my 91 Delica. I live in Alberta, I have a friend that will be driving a flat bed from Jasper AB to Vancouver in April, and he will be able to pick it up to save me the shipping costs.
I need all the details possible, preferably a bare bones motor, and i'm willing to swap my current motor. It has a damaged crank shaft and pulley, 200,000km on it. I'm looking for something ideally under 100,000km but ill take what i can get. Obviously it needs to be in good working order.
Glen.. if you have something or can get a motor then i believe Harry is going down to see you. That would be great.

-Tyler

Re: Looking for 4D56 engine for a 91 delica

Posted: Fri Apr 30, 2010 9:45 pm
by Delicaman
tyler.heather wrote:Hey everyone,
I'm looking for an engine for my 91 Delica. I live in Alberta, I have a friend that will be driving a flat bed from Jasper AB to Vancouver in April, and he will be able to pick it up to save me the shipping costs.
I need all the details possible, preferably a bare bones motor, and i'm willing to swap my current motor. It has a damaged crank shaft and pulley, 200,000km on it. I'm looking for something ideally under 100,000km but ill take what i can get. Obviously it needs to be in good working order.
Glen.. if you have something or can get a motor then i believe Harry is going down to see you. That would be great.

-Tyler
Did you guys get your engine? If not, check this out; http://www.comoxvalleydelica.com/show13 ... 56_Engines

Benn

Re: Looking for 4D56 engine for a 91 delica

Posted: Sat May 01, 2010 12:17 am
by thedjjack

Re: Looking for 4D56 engine for a 91 delica

Posted: Sun May 02, 2010 12:12 am
by delicat
Google is your friend (and Delica.ca!)

http://reddeer.kijiji.ca/c-cars-vehicle ... Z201506199

It's in Alberta, pretty much the same as the Delica but with an intercooler that you could remove or modify. Just confirm with a good shop (Glenn at CCautos or Butch at CVI) to make sure it will work! Either of these guys or maybe even better ask Mardy at AmazingAutoImports, they might have a spare for you.

Cheers,
David