Page 1 of 1
Hi
Posted: Wed Mar 18, 2009 7:08 pm
by parkside
Hi everyone,
My name is Jesse, I've been in the offroad and custom fabrication industry for about 16 years and own a shop in the Fraser Valley. We do a lot of import vehicles including the Delica and the Pajero.
Just about any problem you throw at us we can solve....whether it be lift solution or custom bumpers, roof racks, sliders, tire carriers. We also perform repairs and maintenance.
Glad to meet you all :)
Jesse Smith
Parkside Automotive
parksideauto@hotmail.com
604-309-7718
Re: Hi
Posted: Thu Mar 19, 2009 10:49 am
by FalcoColumbarius
Welcome aboard, Jesse. Good to hear what you can do ~ I suspect there will be people in the Fraser Valley that will be interested in finding out where you are. So you do custom mods as well as oil changes, this is good ~ one of the places we go for this now is NSOR ~ what sort of installations have you done?
Falco.
Re: Hi
Posted: Thu Mar 19, 2009 10:51 am
by delicat
Hi Jesse,
Welcome to this forum! I think a lot of us already know you by name as the "other" Jesse mentioned you on many many occasions! It will be nice to have another shop to pamper our Delica!
Make sure to keep the pictures of your products coming our way!
Welcome again,
David
Re: Hi
Posted: Thu Mar 19, 2009 7:16 pm
by parkside
Thanks for the welcome guys
Falco, you name it, we've done it. We have a winch bumper in the works and should have the prototype built in the next 3-4 weeks....aiming for 2 weeks though.
David, thank you very much. And don't worry, we'll be sure to post pics of the new bumper and the planned sliders as well.
Re: Hi
Posted: Thu Mar 19, 2009 10:30 pm
by dfnder
I'm looking to get a rear hitch/bumper made that possibly has a swinging tire holder attached so I can put a WVO tank where the tire now sits. I guess options for the tire mount would be to - buy a ready made one, fabricate one or get a used one from a wrecker. Any ideas? Was that winch on a front mount or rear mount bumper?
Thanks, Peter
Re: Hi
Posted: Thu Mar 19, 2009 10:40 pm
by konadog
How about an front mount for the spare tire (tyre for you Falco
)? I did the 10k rotation the other day and once again found myself wishing the spare was mounted up front on the bull bars - It would be great to have room for a WVO tank too, but more to the point, when ya need to get the spare having a front mounted one is WAAAAY easier to get at
Re: Hi
Posted: Thu Mar 19, 2009 10:48 pm
by fexlboi
Welcome on board Jesse! Can't wait to see all the mod photos...
What is your experience with welding aluminum?
Cheers
Re: Hi
Posted: Fri Mar 20, 2009 1:03 am
by parkside
Hi Guys,
dfnder: the winch mount bumper would be for the front, however, a rear one is possible with a switchable winch, call me and I will explain. As far as a tire carrier on the front, this is easily adaptable to our design.
Konadog: Stay posted for front mount options, you can always give me a call as well. I have very much have an open door policy....willing to discuss any custom mods required.
fexlboi: Lots of aluminum welding done. Let me know what you have in mind. thanks for the welcome :) Everyone I've talked to here so far seems GREAT!!!!
Jesse Smith
Parkside Automotive
Re: Hi
Posted: Fri Mar 20, 2009 2:10 pm
by TardisDeli
Hi Jesse, Welcome to the group. Hope we can meet you this weekend for the camping trip (I sent you PM).
I have a campfire kitchen firegrill idea I wonder if you can make.
Cheers, Christine.
Re: Hi
Posted: Fri Mar 20, 2009 5:59 pm
by parkside
Hi Christine :)
Thanks for the welcome! Let me know about your grill idea and I'm sure we can come up
with something. About this weekend, something has come up with one of my kids and I'm
not sure we're gonna make it anymore. We will try our best though.
Take care
Re: Hi
Posted: Mon Jun 08, 2009 2:16 am
by -luong.
Hi Jesse.=-). My name is Tony and I was wondering if you have any lift kits for a Pajero?? Looking to get at least 2". Let me know. Thanks and cheers