My 250 Gallons WVO tank in my bus!
Posted: Sun Apr 13, 2008 6:43 pm
Just picked up this big 250 gallons tank for free, loving it! I'll be using it as my 3rd WVO tank (my clean oil storage tank).
It's 6' long by 5' high by 2' wide and I'm very impressed that I was able to unload it by myself without damaging my too clean Delica! (Loading it was another story but still no damages).
That blue 55 gallon barrel was also free, don't know yet if I can use it for my system or if it will be for water collection in the garden.
I took the plunge and bought my WVO kit and also my filtration system.
For the filtration I'll be using a Redline kit that I customized a bit when I ordered it. There's a 400u mesh at the tip of the wand to pick up the dirty oil in the 1st barrel followed by a large 2" by 8" 140u strainer on the suction side of the pump. On the other side of the pump I'll have a reusable 30u filter for the 1st pass (dumping the WVO in the 2nd barrel) and from there I'll be doing a final pass by changing the element of the reusable filter down to 10u to ends it's course in the large 250 gallons tank.
For the kit on the bus I'll be using mostly PlantDrive parts mixing it with some other parts. Don't want to reinvent the wheel here, just want a trouble free system.
So thanks to everyone that help me go ahead with this project;
Kevin, Eric, Adam, Josh, Sean... you were all a big chunk of inspiration and knowledge!
I'll update as I go along, thanks again!
It's 6' long by 5' high by 2' wide and I'm very impressed that I was able to unload it by myself without damaging my too clean Delica! (Loading it was another story but still no damages).
That blue 55 gallon barrel was also free, don't know yet if I can use it for my system or if it will be for water collection in the garden.
I took the plunge and bought my WVO kit and also my filtration system.
For the filtration I'll be using a Redline kit that I customized a bit when I ordered it. There's a 400u mesh at the tip of the wand to pick up the dirty oil in the 1st barrel followed by a large 2" by 8" 140u strainer on the suction side of the pump. On the other side of the pump I'll have a reusable 30u filter for the 1st pass (dumping the WVO in the 2nd barrel) and from there I'll be doing a final pass by changing the element of the reusable filter down to 10u to ends it's course in the large 250 gallons tank.
For the kit on the bus I'll be using mostly PlantDrive parts mixing it with some other parts. Don't want to reinvent the wheel here, just want a trouble free system.
So thanks to everyone that help me go ahead with this project;
Kevin, Eric, Adam, Josh, Sean... you were all a big chunk of inspiration and knowledge!
I'll update as I go along, thanks again!