Delica Canada | Mitsubishi Van Club

L400 2nd gen
Where and how to install a pyrometer.
Please and thanks

If you have video


Envoyé de mon iPhone en utilisant Tapatalk

I installed my autometer 2 1/16 pyrometer gauge in replacement of the inclinometer. fits perfect in the same hole in that instrument cluster and just wired it into the existing wires from the temperature gauge.
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.

I can send you some photos of it if you want

Awesome to know the Autometer 2 1/16 gauges fit perfectly there. I was pondering that myself and just hadn't gone out to measure yet. Thanks for sharing that.

Avittery wrote:I installed my autometer 2 1/16 pyrometer gauge in replacement of the inclinometer. fits perfect in the same hole in that instrument cluster and just wired it into the existing wires from the temperature gauge.
As for the thermocoupler...I tapped it into my blanking plate where my EGR used to be and ran the cables through the steering column grommet in the firewall.

I can send you some photos of it if you want

I would really like to see some photos if you wouldn't mind! Thanks!

Sorry this took so long! Not entirely sure how to post photos here...

http://imgur.com/a/rwQ1E

http://imgur.com/a/lncgj

Thank you.
Very helpful.


Envoyé de mon iPhone en utilisant Tapatalk

Does your inside/outside temperature read out work?
If so, were did you find the temp probes? Or do they come stock and the wiring is included in the connector of wires that plugs into the binnacle?
I have mine but haven't connected it yet so don't know if it works.
I'm looking for a reasonably priced Pyrometer.
Avittery - What did you pay for yours?