Delica Canada | Mitsubishi Van Club

Ok, it seems my Delica is lower on one side (Passager side) on the front end. Brands new tires inflated equally and on leveled ground. Estimated to be about 1cm (half an inch) lower on one side as measured between the top of the tire and the fender margin. Any clue, help, remedy, tools needed ?

Much Thanks

Lapprentis

Torsion bar.(front) can be adjusted by turning the main bolt. Look up 'how to adjust torsion bars'.The front end components should be checked as well...ball joints, bushings. (no your shocks don't affect ride height, they only soften the bumps out).


Leaf Spring (rear) If one is weak or broken they can't be adjusted. Only replaced.