Delica Canada | Mitsubishi Van Club

Here's the post you're looking for, on how to change the headlamp bulbs:

http://www.delica.ca/forum/here-s-how-t ... -3949.html

The trickiest part would probably be finding the right screwdriver to fit in the deep narrow space between the bumper and piece of trim underneath the lens. Carefull too, those old screws can be soft as cheese.

The bulbs that come with the aftermarket headlight assemblies are low quality, and it's very common for them to burn out early. I'd recommend changing all, if you're going to be tackling the job anyway.

gtexjunkie wrote:I did find the fill hole and did put in about 100ml of wiper fluid in and it spit the rest out. So maybe it is frozen It is not critical. Maybe it needs more priming.

No it doesn't really take priming, sounds frozen. One possibility is that the nozzle end is clogged with mud, I've had that when driving the Dempster. But most likely frozen.

gtexjunkie wrote:Erebus, I parked by you at Chinook on Sat am, was in watching Avatar. I put two and two together and figured it was you. Nice ride.

If it was Friday AM, then I was in watching Avatar 3D IMAX too. If it was Saturday, it wasn't me, I never left the house.

gtexjunkie wrote:I looked through the docs that were send and some of it kinda made sense the importer had the vehicle, its last registration had 53000kms and it was made in Dec of 91, that is kinda like 92. All the photos are of the same vehicle. I did get good service from Gerry then the delays got longer, but he did give me lots of detail when he did respond.

I am looking forward now to getting her out to do some playing, see you all out there.

If it was made Dec 91, then it is a 92 model. You have 2nd row shoulder belts, right? Centre brake light? Yup, then it's a 92. I was told mine was 91, turned out to be a 92 model. So you never know.