Hello. Would anyone have an extra passenger side red lens cover for the door to sell?
Thanks
Red lens cover for the door
-
flyfishn
- Posts: 279
- Joined: Sun Nov 23, 2008 8:27 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed/Yamaha Scooter
- Location: North Vancouver
Red lens cover for the door
Keep your tip down and your line tight......happy fishn
Stay away from North Shore RV
Stay away from North Shore RV
-
Modsqwad
- Posts: 233
- Joined: Fri Jan 02, 2009 11:39 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 91 Deli & KLR 650
- Location: Victoria BC & Sayulita Mexico
Re: Red lens cover for the door
Damn! I hope it didn't break because of the new armrests! How did they work out Isaak?flyfishn wrote:Hello. Would anyone have an extra passenger side red lens cover for the door to sell?
Thanks
Andy
-
flyfishn
- Posts: 279
- Joined: Sun Nov 23, 2008 8:27 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1992 Super Exceed/Yamaha Scooter
- Location: North Vancouver
Re: Red lens cover for the door
If I say yes, will you send me your lens cover?
Actually, I am not Isaac, so no need to worry!
Actually, I am not Isaac, so no need to worry!
Keep your tip down and your line tight......happy fishn
Stay away from North Shore RV
Stay away from North Shore RV
-
mararmeisto
- Posts: 3276
- Joined: Wed Sep 19, 2007 10:00 am
- Vehicle: 2018 Ram EcoDiesel
- Location: Dartmouth, NS
Re: Red lens cover for the door
My lens covers were already quite cracked before I changed out the arm rests, so I had to change them anyways.
I have noticed that the varnish is VERY soft. The wood itself is very hard, but the varnish has already got some nicks and dings in it. Might have to sand them down and try something else. Artacoma, any ideas?
I have noticed that the varnish is VERY soft. The wood itself is very hard, but the varnish has already got some nicks and dings in it. Might have to sand them down and try something else. Artacoma, any ideas?
JPL
I still miss my '94 Pajero!
I still miss my '94 Pajero!
-
Modsqwad
- Posts: 233
- Joined: Fri Jan 02, 2009 11:39 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 91 Deli & KLR 650
- Location: Victoria BC & Sayulita Mexico
Re: Red lens cover for the door
Ha Ha sorry dude I got you mixed up with fish slapper.flyfishn wrote:If I say yes, will you send me your lens cover?
Actually, I am not Isaac, so no need to worry!
Andy
-
Modsqwad
- Posts: 233
- Joined: Fri Jan 02, 2009 11:39 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 91 Deli & KLR 650
- Location: Victoria BC & Sayulita Mexico
Re: Red lens cover for the door
Yes I agree revarnishing with something harder (and more than one coat) would be a good idea I have already done so to mine. If youmararmeisto wrote:My lens covers were already quite cracked before I changed out the arm rests, so I had to change them anyways.
I have noticed that the varnish is VERY soft. The wood itself is very hard, but the varnish has already got some nicks and dings in it. Might have to sand them down and try something else. Artacoma, any ideas?
are sanding the wood wear a mask as the dust it worse than pressure treated. Buen Suerte.
Andy