Inner front wheel bearing seal
Posted: Sat Aug 01, 2020 11:32 am
Hi there,
I had machine my brake rotors so as a result the hub had to be removed as well. I removed everything last weekend and I forgot how
the inner bearing seal was assembled. I can't remember if the spring o-ring goes on the inner bearing side or on the axle side. I looked at the
cross section of the whole brake and hub assembly in the technical manual in Deliwiki but the picture is a little too blurry. Any info would be much
appreciated as my lovely wife is super pissed off that I'm taking up her parking spot.
Thanks
I had machine my brake rotors so as a result the hub had to be removed as well. I removed everything last weekend and I forgot how
the inner bearing seal was assembled. I can't remember if the spring o-ring goes on the inner bearing side or on the axle side. I looked at the
cross section of the whole brake and hub assembly in the technical manual in Deliwiki but the picture is a little too blurry. Any info would be much
appreciated as my lovely wife is super pissed off that I'm taking up her parking spot.
Thanks