Hey Everyone
Sorry but I have searched and probably missed it but I'm in desperate need of this schematic. I own a 1992 L300 with the Quick/Fast Start, 2 relay system and my ECU has crapped out. I've sent an email via the forum to Daniel from Wing electronics (I sent to both emails that were listed) and I have not received a reply, I hear from Marigold Service that he is back in school....Anyway I know that my board needs repair and a good idea of the repair needed, bad capacitor, possible trace damage and/or "dead short? Have found a tech interested in the job but he has asked if a schematic of the board is available.
Is one actually available or does someone have one they could send me or the link to?
Thanks
lizzard
Schematic available for Glow Plug ECU for two relay system?
-
- Posts: 12
- Joined: Tue Aug 19, 2014 9:30 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300 exceed
- Location: bc
- Growlerbearnz
- Posts: 2041
- Joined: Sat Jun 26, 2010 1:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica P25W
- Location: New Zealand
Schematic available for Glow Plug ECU for two relay system?
I've never seen a schematic, but the board isn't too hard to repair without one: it really is (usually) a case of replace capacitors, repair traces.
Nothing says "poor workmanship" more than wrinkles in the duct tape.