Interest in Kinetic rope group buy? - Delay...
- tonydca
- Posts: 646
- Joined: Tue May 19, 2009 9:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 L400 Exceed - yeah, baby!
- Location: Vancouver BC
- Location: Vancouver BC
Interest in Kinetic rope group buy? - Delay...
My brother-in-law is in the rope wholesale/manufacturing business, and I am getting him to make me up something along the lines of this:
http://www.masterpull.com/item.cfm?itemid=39016
I picked this size/diameter as a compromise of breaking strength to bulkiness/stowage.
These ropes are very neat to watch in action; you could practically extract a D-8 Caterpillar out of a mud pit with your Delica, with reduced shock on all components concerned.
As you can see on the website, these retail for around $110 plus shipping/duty/etc., but if the one he makes me turns out well, I'll ask him if he is up to make a batch; probably cheaper that way. I'll find out what the final cost per foot/unit would be and post back.
Anybody out there interested? And any requests on different size/length? If it comes down to it, they'll likely all be of the same rope size (could be different lengths), but I'm open to suggestions.
http://www.masterpull.com/item.cfm?itemid=39016
I picked this size/diameter as a compromise of breaking strength to bulkiness/stowage.
These ropes are very neat to watch in action; you could practically extract a D-8 Caterpillar out of a mud pit with your Delica, with reduced shock on all components concerned.
As you can see on the website, these retail for around $110 plus shipping/duty/etc., but if the one he makes me turns out well, I'll ask him if he is up to make a batch; probably cheaper that way. I'll find out what the final cost per foot/unit would be and post back.
Anybody out there interested? And any requests on different size/length? If it comes down to it, they'll likely all be of the same rope size (could be different lengths), but I'm open to suggestions.
Last edited by tonydca on Mon Nov 28, 2011 4:15 pm, edited 1 time in total.
Cry "Havoc!" and let slip the elementary-school-aged boys...
- Fishtank
- Posts: 320
- Joined: Sat Mar 17, 2007 11:17 pm
- Vehicle: 1994 Spacegear Exceed LWB Tall
- Location: Okanagan
- Location: Penticton
Re: Interest in Kinetic rope group buy?
I'm interested.
- jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: Interest in Kinetic rope group buy?
me too depending on load/cost.
the master pull one is amazing. I've used it.
the master pull one is amazing. I've used it.
- Tojo
- Posts: 185
- Joined: Mon Oct 31, 2011 4:17 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica L400 Super Exceed LWB
- Location: West Kootenays, BC
Re: Interest in Kinetic rope group buy?
I'm interested as well. Put me down for one and lets see what happens with the price.
1993 Delica L300, SWB, LSD, Super Exceed with Crystal-Lite, mostly stock but it's got a digital EGT!!!
1995 Delica L400, LWB, Super Exceed with Crystal-lite, Airlift airbags, SS intercooler pipes, soon to be WVO
1997 Isuzu ELF 2.0Ton Crane truck, 4300cc diesel, NKR66E
1995 Delica L400, LWB, Super Exceed with Crystal-lite, Airlift airbags, SS intercooler pipes, soon to be WVO
1997 Isuzu ELF 2.0Ton Crane truck, 4300cc diesel, NKR66E
- rezdiver
- Posts: 276
- Joined: Sat Apr 03, 2010 10:10 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 L300
- Location: comox valley
Re: Interest in Kinetic rope group buy?
i am interested in a couple depending on price.
Cheers,
Reza
1991 Delica L300
Bombardier/VW Iltis + 1/4t trailer
http://www.iltisforum.com/
http://rezdiver.usedcourtenaycomox.com/
Reza
1991 Delica L300
Bombardier/VW Iltis + 1/4t trailer
http://www.iltisforum.com/
http://rezdiver.usedcourtenaycomox.com/
-
- Posts: 501
- Joined: Mon Jul 13, 2009 6:20 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 94' SWB Pajero, 94' LWB Pajero 3.5L
- Location: Calgary
- Location: Calgary
Re: Interest in Kinetic rope group buy?
What he said.
Tony, have they made these before?
Regardless, put me down for one if it happens.
Tony, have they made these before?
Regardless, put me down for one if it happens.
'94 SWB Pajero 2.8L ITD, '94 LWB Pajero 3.5L DOHC
-
- Posts: 31
- Joined: Tue Nov 02, 2010 10:31 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L400 SWB Gasser!!!
- Location: Pemberton BC
- Location: Pemberton, BC
- tonydca
- Posts: 646
- Joined: Tue May 19, 2009 9:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 L400 Exceed - yeah, baby!
- Location: Vancouver BC
- Location: Vancouver BC
Re: Interest in Kinetic rope group buy?
He has all of the tools and equipment for doing the proper eye-loops, stitching, etc.pajerry wrote:What he said.
Tony, have they made these before?
Regardless, put me down for one if it happens.
He is used to making all kinds of custom ropework, and this sort of thing is very common in smaller diameters for fall-arrest gear. His comment was that it was not a big deal for him.
The type of rope like what is in the MasterPull product is apparently a standard type of rope; my brother-in-law can order it wholesale from his manufacturer. I think a typical full roll of rope (lowest unit cost) is 500 feet.
What I'm envisioning is if we can get enough interest at a particular size (rope diameter) for him to order a whole roll, then he can make up individual units for a fixed cost to put in the loop splices at each end (mostly labour) plus $x per foot for the rope.
That way you can order one as short or as long as you like. No difference to him.
I'll know more details once he finishes up one for me. Maybe someone in the Vancouver area here can help me test it out
Cry "Havoc!" and let slip the elementary-school-aged boys...
- joedelica
- Posts: 204
- Joined: Tue Jan 08, 2008 10:14 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 Exceed XR The Sapporo Can
- Location: VanCity
- Location: VanCity
Re: Interest in Kinetic rope group buy?
I would be in for one, and I have two Deli owner's not on the forum that would also be interested.
Cheers,
Joe
Cheers,
Joe
-
- Posts: 95
- Joined: Mon Oct 24, 2011 12:33 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: l400
- Location: kamloops
Re: Interest in Kinetic rope group buy?
i would be in
-
- Posts: 198
- Joined: Fri Dec 04, 2009 8:47 pm
- Vehicle: 89 low roof L300
- Location: Nelson, BC
- Contact:
Re: Interest in Kinetic rope group buy?
I'm interested.
- tonydca
- Posts: 646
- Joined: Tue May 19, 2009 9:01 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 L400 Exceed - yeah, baby!
- Location: Vancouver BC
- Location: Vancouver BC
Re: Interest in Kinetic rope group buy? - Delay...
So I got my 20-foot tester rope from my brother-inlaw. And he did a great job on it. But...
Unfortunately, the one he made me was exactly the *opposite* of what I had described to him. It turned out to be an ultra-high modulus, zero-stretch, 40,000-lb break strength, synthetic light weight but tough as steel, rip-your-bumper-off-if-you-took-a-running-yank like the guys in the video.
So I'm getting him more specs, but he's pretty swamped at the moment, so it's looking more likely to be in the New Year.
I post this in case anyone is waiting on one as a potential Xmas present.
Tony.
Unfortunately, the one he made me was exactly the *opposite* of what I had described to him. It turned out to be an ultra-high modulus, zero-stretch, 40,000-lb break strength, synthetic light weight but tough as steel, rip-your-bumper-off-if-you-took-a-running-yank like the guys in the video.
So I'm getting him more specs, but he's pretty swamped at the moment, so it's looking more likely to be in the New Year.
I post this in case anyone is waiting on one as a potential Xmas present.
Tony.
Cry "Havoc!" and let slip the elementary-school-aged boys...
- Fishtank
- Posts: 320
- Joined: Sat Mar 17, 2007 11:17 pm
- Vehicle: 1994 Spacegear Exceed LWB Tall
- Location: Okanagan
- Location: Penticton
Re: Interest in Kinetic rope group buy? - Delay...
I'm good with that Tony. Besides, I didn't tell my wife that I was buying myself a Christmas present anyway.
- joedelica
- Posts: 204
- Joined: Tue Jan 08, 2008 10:14 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 95 Exceed XR The Sapporo Can
- Location: VanCity
- Location: VanCity
Re: Interest in Kinetic rope group buy? - Delay...
Thanks for your effort Tony.
Still interested in the New Year for probably 3 ropes.
Happy Holidays!
Joe
Still interested in the New Year for probably 3 ropes.
Happy Holidays!
Joe
- jessef
- Posts: 6459
- Joined: Tue Feb 26, 2008 1:27 pm
- Vehicle: JDM flavour of the month
- Location: Vancouver
- Location: Vancouver, BC
Re: Interest in Kinetic rope group buy? - Delay...
why not just buy the masterpull one?
The US military has a contract with them for the kinetic ropes. If you want something that can handle that extreme pulling, tugging, heavy weight and depend on it, I would go with the masterpulls.
All it takes is one or two vehicle saver pulls and the $120 pays for itself right there.
The US military has a contract with them for the kinetic ropes. If you want something that can handle that extreme pulling, tugging, heavy weight and depend on it, I would go with the masterpulls.
All it takes is one or two vehicle saver pulls and the $120 pays for itself right there.