Delica Canada | Mitsubishi Van Club

Hi, No longer have time for collecting and cleaning oil and need the space. Over $3500 worth of high quality equipment. All running perfectly. Very low litres through the equipment. Asking $1800 for the whole setup. The centrifuge alone is $2000. Located in Duncan BC. if your interested Check out my...

Hi Have for sale in very lightly used condition. Only has seen about 500L WVO. No time. Comes complete with VFD control to run the motor at 6000RPM; bolt on heater; and raw power booster. Both the centrifuge and heater are 120v so just plug and play. This is absolutely the best unit you can get for ...

Everyone is always looking to get rid of these...but never when you need one. Do you have one on southern vancouver island between Nanaimo and Victoria area you want to part with for free or really cheap?

Also looking for driver and front passenger seats.

Thanks,
Kuan.

Are you sure you did the correct relay? I have an 1989 Pajero and I found that I had to replace the fuel lines front to back as they were heavily rusted in some places. Then I found that at the tank the pickups were rusty and had some pin hole leaks. This only caused starting problems in the cold. W...

Its been a long time since I've posted up on here. I just recently spotted a great deal on this 1989 Pajero on used Victoria. It was only $1800 :shock: and the timing couldn't have been more perfect. We are trying to finish our new house so have put Licorice (L400) up for sale to help fund some insu...

I have a pair of L300 rear slider windows with new mounting gasket sitting in my crawl space. You can use these to replace the pop out windows on a L300.

Located Duncan BC.

$200 obo.

Kuan

Here is a great deal. 2.5" stainless exhaust from my SWB L400. Its not a full stainless but about 2/3 of the full length. We put a side exhaust to make room for our veg tank but this one is in excellent condition still. I told my kids if they polished it up they could get the money from the sal...

I like the stuff that Leon and Jason are working on at http://www.wvodesigns.com/ Their stuff is pretty slick and at the same time cost effective. They have the hot sticks in different lengths now, a heated filter (combo coolant and electric) that is very low profile, and some very nice but inexpens...

Thanks for the link - there are some interesting pieces on Vice.

Is the height adjustable or would it be possible to modify these so they don't sit so high on a low roof van?

These look great btw.

perfect thanks!

Hi, The Japanese HID ballast on my left headlight is not working anymore. I've checked all the wiring and the bulb and they are fine so I think the ballast itself is not working and I don't know where to get this stuff replaced. I'm thinking of removing the whole HID system and replacing with origin...

Hi Chris,

Thanks for the info. I bought a roll of 3/8" fuel line and was wondering whether to get adapters for the 1/4" and 5/16" lines but sounds like you made it work with the 3/8" so I may try that too.

Kuan

That looks great. If you didn't loop the return, where did you have the return go?? Back to the veg. Tank or the diesel tank? I'm just going to pick up some fuel line at princess auto. What size fuel line did you use for wvo and diesel? I was going to buy the 3/8" hose but was wondering what si...

For an initial version I am aiming for: Monitoring coolant temperature, Monitoring WVO filter pressure, Monitoring WVO fuel level, Controlling WVO valves and in-line heater I think it would be good to monitor actual WVO temperature before injection as this is the critical item that could go unnotic...