Delica Canada | Mitsubishi Van Club

how do i inspect if the egr or wastegate are stuck?

I just changed the head the engine sounds good when idle but when i push the throttle there is no power. There is coming smoke from the turbo exhaust part. no leaks. Any tips?

I have got the new head and am moving parts. how do i move the pump on the back of the head? it is a 4d56 with tubo and intercooler.

I have gotten off the head how do i inspect the piston surface?

Started to disassemble everything connected to the engine head. My first big engine repair changing the valves.

Thanks for the help! I will continue on with taking out the top, I have time but not all the know how in engine repair. Taking it to the mechanic is way to expensive here in Norway 100-200$ an hour in labor, and i payed about 3500$ for the car.

So i screwed up the timing first time around, confusing seamed to be 3 alignment points for the lower sprockets. Broke 3 rocker arms. have changed the rocker arms, fixed the timing. tried to start and hear a soft popping sound. where sould i go from here? take of the topp? valve number 3 from the fr...

Thanks for all the help. I had to take out the pulley to reach all of the bolts for the pump for some reason, it is covered by a plastic cover held in place by the pulley. For future reference tapping on the pulley for about 2 hours and alot of wd-40 gets it loose.

I am trying to change the water pump on my l300 engine 4d5. I have taken out generator, servo, thermostat and the top plastic cover. But i am having problems with the bottom one, I have tried to take out the crankshaft pulley, lined it up and unscrewed the middle bolt but it is still stuck. Any sugg...

So figured out it was the diff. oil that was leaking.
It was just to take out the brake shoes, take off the breakpipe, take out the 4 bolts that keeps the axle in place and pull out the axle.
Thanks for all the help.

I don't know the number but just changed the wire on mine. Be careful and get the wire path right the first time because it is a lot of hassle controlling that stiff wire in a tight space. Also take off the front wire brackets off first before trying to get it out. Use a steel wire to get it back up...

Thanks for a warm welcome. I can see i will like it here. Will contribute in any way i can. Will post more pics later. I live about 1 hour south west from Oslo in Kongsberg a lot of snow here during winter and that's when the Delica really shines.

Thanks for the swift reply. The info i have found is the Pajero rear axle assembly schematic can anyone confirm that it is the same setup. How do i tell the transmission oil from the brake fluid? The brake cylinder is working fine and looks like the only dry thing in there. How do i proceed to repla...

Picture of a dent made by a moose head. No one got hurt in the crash except the moose who died on impact.

Hi
I have some problems with the rear breaks. I took of the drum, and the inside is covered with some kind of grease. There is no leak from the break fluid (cylinder or pipe), i have checked the differential fluid and it is full. Any suggestions would be much appreciated?