Delica Canada | Mitsubishi Van Club

Wow, you are one dedicated Deli owner. I can't imagine how you continued through the smoke to find the solution to this problem. Thanks for the great narration of this problem. TLGF Thanks! some decent follow-up posts can be searched using the terms "main crank pulley", as I have been giv...

UPDATE: SOLVED I've been meaning to update ya'll on what actually happened. And thankfully it was a clear Ah-HA moment. As described above, I proceeded to pull off the intake manifold and change the plugs/wires. Put it all back together... No difference. So it was not some random massive IGN ground...

I thought it might be time for your update. I've been following your post. I like the way you've described your problems and the solutions you've tried. You are one persistent dude! Someone on the site should be able to give you ideas - I have a diesel L300 so my knowledge would be pretty useless. ...

So an update on timing, Tested timing during cranking with fuel relay unplugged (to help save the new starter), and timing is way off. Coil 1&4 (center coil) with timing light hooked up shows around 240 degrees advanced (or 120 deg retarded). huh?. It was very difficult to find, hiding behind th...

Verified that the main crank pulley and harmonic balancer are fine, the mechanical aspects of timing appear perfect, the main pulley and right cam sprocket timing marks are perfect. Belt seems due for a change soon, but cannot see any reason to believe that these are the cause, or that internal engi...

Scanner cannot do JOBD. Returned. Ok, latest update. Picked up a new timing light, my old one seemed to have inconsistencies, the pickup seemed to have trouble, found a crack in the pickup. New one is consistent. But that only deepens the mystery. Because the laboured cranking is very hard on the st...

I bought an Innova OBD2 scanning tool, model 3100, and it is unable to establish communication at the port, ignition in the ON position... going to try and clean the port and check for obvious wiring issues there.
??wow?? ... really not catching any breaks.

Hello all, thanks for reading. Ok my main ride (daily, work) has been down now for two months. Here is the rundown on what transpired, and what I have tried, and where I am now. This is very hard without a proper Delica '98 v6 Series 2 manual :/ L400 S2 ('98) V6 has been nearly flawless for 5 years....

I absolutely love the rims! :M Thanks! :-D up toggle switch like this on the dash.P1020634.JPG I should have known, lol, exactly what it looks like it should be... thanks! *EDIT I should add, that toggle utilizes a relay that I hear clicking somewhere under the dash, but nothing happens to that ant...

Hi Gandalf If the antenna on the passenger side is the one you refer to, that is a curb finder designed to avoid leaving your sidewalls behind. You're right, it's best left retracted, like sleeping dogs... You should have a manual antenna on the drivers side. Looks like a fun project MD :-D Hiya! T...

Thanks Falco, Merry Christmas to you and all! Installing a double-din touchscreen stereo deck (DVD/all-discs, USB, SD slot, hands-free phone-bluetooth, backup cam) tomorrow. Already installed an 8" sub in the hatch door (along with a backup camera), powered by a bridged Alpine amp. Replaced the...

OK, some pics of the modified OEM panhard bar... made adjustable. Also note the extension welded into the brake hardline brace, just to the left of the diff in the first pic, and another brake hardline brace extension near the top of the wheel in pic #2: http://www.mk15.ca/MJK_iPage_Website/Delica/S...

thelazygreenfox wrote:no pine cones and clean windows. Oh the van looks good too.

Lol!
I just felt so sorry for it sitting there... it was the first minute I saw it in that pic... like a puppy, I had to bring it home.

Here's another before/after comparison for fun:

Before:



After:

Hey there.
Just thought I'd say thanks Stefan for the good product and chat, got it installed, and in combination with CCA HD rear springs it was a substantial lift. Love it.

Build thread with pics here:
http://www.delica.ca/forum/viewtopic.php?f=10&t=17953