TieMyShoe's Grinded Cam

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

Post Reply
takeuchi
Posts: 57
Joined: Thu Nov 06, 2014 11:08 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Starwagon Super Exceed
Location: Vancouver

TieMyShoe's Grinded Cam

Post by takeuchi » Sat Apr 14, 2018 9:32 am

I ended up getting ahold of one of TieMyShoes Grinded cams, so I thought I would post my thoughts on it after driving with it a while.

It feels like my van doesn't bog down as much going up hills or trying to accelerate at highway speeds. Usually I feel a large dropoff in power once it goes past 3000 rpm or so but with the new cam it isn't as harsh. I don't feel like I'm much faster but maybe because it feels like I'm just not allowing down as much.

I also feel like the EGTs went down a touch as well.

Hopefully Cam can chime in on how much it costs.

Sent from my ONEPLUS A5010 using Tapatalk

TieMyShoe
Posts: 264
Joined: Mon Sep 09, 2013 11:14 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300
Location: Abbotsford

TieMyShoe's Grinded Cam

Post by TieMyShoe » Mon Apr 30, 2018 8:22 pm

Glad your happy with the new cam. The grind is designed to move the powerband of the 4D56 a moee usable RPM range. The stock cam has a bunch of grunt out of the hole but rapidly drops off. The new grind keeps you in the power band while criusing or under general acceleration.

I will be doing a second run when i am able to source out more cores. Prices can be expected in the 300-350usd depending on the size of the run.

User avatar
canvanner
Posts: 4
Joined: Wed Nov 22, 2017 2:57 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1992 Delica Exceed P24W
Location: Water Valley AB

TieMyShoe's Grinded Cam

Post by canvanner » Wed Jan 02, 2019 5:26 pm

Any thoughts on doing a cam grind for the 4G64 gas?! I've been thinking about it but not really sure where to go...

TieMyShoe
Posts: 264
Joined: Mon Sep 09, 2013 11:14 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L300
Location: Abbotsford

TieMyShoe's Grinded Cam

Post by TieMyShoe » Wed May 08, 2019 8:03 pm

afraid the 4g64 and myself have a rocky history and we are currently not on speaking terms. Being that the 4g is used in everything under the sun i would think somebody must already make a cam for it no?

Post Reply

Return to “Delica Modifications”