Just doing the front brake conversion today and i was wondering what type of brake fluid to put back in. Dot 3 or Dot4.
Cheers
Alan
			
			
									
						
										
						Brake fluid
- 
				jellybean
 - Posts: 7
 - Joined: Wed Sep 03, 2008 7:16 am
 - Member's Photo Album: http://www.delica.ca/Photos/
 - Vehicle: 1990 delica
 
Re: Brake fluid
Doesnt matter. Basically the same thing, different boiling points.
			
			
									
						
										
						- 
				jellybean
 - Posts: 7
 - Joined: Wed Sep 03, 2008 7:16 am
 - Member's Photo Album: http://www.delica.ca/Photos/
 - Vehicle: 1990 delica
 
Re: Brake fluid
Thanks for the reply. It says on the inside of the dash cover to use Dot3. I did the brake conversion on the front yesterday had a hell of a time splitting the hub from the rotor. Did the rear brakes today and installed a new gas tank because mine was rusty. To busy to take any picks. On my way to mexico next week.
cheers
alan
			
			
									
						
										
						cheers
alan
- dfnder
 - Posts: 526
 - Joined: Wed Mar 05, 2008 9:36 pm
 - Member's Photo Album: http://www.delica.ca/Photos/
 - Vehicle: '91 Exceed
 - Location: Squamish
 
Re: Brake fluid
An old girlfriend of mine used to have neighbors that took a motorthome to Mexico every year, on the way back they would fill one water tank with kaluha.  Don't think I would try it with a gas tank :)