L300 Automatic and Manual = same engine?
-
- Posts: 9
- Joined: Fri Oct 30, 2015 1:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300 Commando
- Location: Nanaimo
L300 Automatic and Manual = same engine?
Maybe a foolish question but is there any reason swapping an engine from a manual transmission l300 into an automatic would be problematic? Or would work great?
-
- Posts: 189
- Joined: Thu Oct 06, 2016 3:24 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: '91 Delica L300
- Location: Pennsylvania, USA
- Growlerbearnz
- Posts: 2041
- Joined: Sat Jun 26, 2010 1:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Delica P25W
- Location: New Zealand
L300 Automatic and Manual = same engine?
^What he said. All same, though you'll have to swap a few minor things from one engine to the other depending on which direction you're going. Flywheel/flex plate, kickdown linkage, ... err... I think that's it actually!
Nothing says "poor workmanship" more than wrinkles in the duct tape.
-
- Posts: 9
- Joined: Fri Oct 30, 2015 1:58 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300 Commando
- Location: Nanaimo
L300 Automatic and Manual = same engine?
Excellent. Thank you