Torsion bar....
-
- Posts: 116
- Joined: Thu Sep 18, 2014 8:57 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica 1998 Chamonix
- Location: Cherry Grove, Ab
Torsion bar....
Where can I get the best HD torsion bar for less money??
There is good stuff in Australia, but fees is the major problem.
There is good stuff in Australia, but fees is the major problem.
-
- Posts: 77
- Joined: Thu Dec 18, 2014 10:44 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 97 L400 super exceed
- Location: Calgary, alberta
Torsion bar....
I had a quote from ironman 4x4 in the states for just under 400usd, included rough shipping to Canada, but not any import fees
Deli Duncan
97 L400 gen 2
97 L400 gen 2
Torsion bar....
Duty from Australia is only 6% on the torsion bars. It's the GST and for those lucky enough PST that hurt!!
-
- Posts: 116
- Joined: Thu Sep 18, 2014 8:57 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica 1998 Chamonix
- Location: Cherry Grove, Ab
Torsion bar....
Here is the quote I received. Good think is that I live in Alberta, no PST..
To supply and send the Dobinson torsion bars including freight on a carrier such as DHL would cost a total of AUD471 = 456 CAD.
This does not include any local customs duty or taxes that may be payable in your own country.
To supply and send the Dobinson torsion bars including freight on a carrier such as DHL would cost a total of AUD471 = 456 CAD.
This does not include any local customs duty or taxes that may be payable in your own country.
-
- Posts: 18
- Joined: Thu Mar 30, 2017 6:12 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica
- Location: Sudbury Ontario
Torsion bar....
Hey did you ever find torsion bars in Canada. Just bought and 98 delica space gear would like to put lifting on.
Wondering if you finally found some tortion bars
Wondering if you finally found some tortion bars
-
- Posts: 116
- Joined: Thu Sep 18, 2014 8:57 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica 1998 Chamonix
- Location: Cherry Grove, Ab
Torsion bar....
No I didn't buy nothing since then. I stop working on my Deli for few month now. I'm looking to put it back on road now. I will maybe order new HD T-Bars this fall or winter because the factory torsion bar are so soft that I am sure I need new one.
-
- Posts: 116
- Joined: Thu Sep 18, 2014 8:57 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica 1998 Chamonix
- Location: Cherry Grove, Ab
Torsion bar....
I ordered a pair of Dobinsons T-Bar last night... I can't wait to installed theme on my Deli. Since I installed CCAuto HD coil spring, it is not an option to get HD torsion bar in front. The handling gonna be improve and the overall stability of the van.
-
- Posts: 116
- Joined: Thu Sep 18, 2014 8:57 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica 1998 Chamonix
- Location: Cherry Grove, Ab
Torsion bar....
I installed my HD T-bar with my friend today. Even without an aliment and been properly adjusted. the difference is insane. I can't wait to dive my van when everyting will be perfectly ajusted.
-
- Posts: 55
- Joined: Sun Sep 27, 2009 11:54 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Audi 90 Quattro 20v
Torsion bar....
Did you get these from the US warehouse in Miami?P.Gaudreault wrote:I installed my HD T-bar with my friend today. Even without an aliment and been properly adjusted. the difference is insane. I can't wait to dive my van when everyting will be perfectly ajusted.
Ive been doing a lot of poking around on how to lift them and not sure where people are buying from or if they buying direct.
Whats the $$damage$$ on the bars from them?
It's not speed that kills. It's that stopping suddenly that really gets you. - JC (Jermey Clarkson)
-
- Posts: 116
- Joined: Thu Sep 18, 2014 8:57 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica 1998 Chamonix
- Location: Cherry Grove, Ab
Torsion bar....
Good day Audi4life,
I ordered theme directly from Australia. I didn't know there was a warehouse in USA. Do you have a link to reach theme?
It cost me roughly 500$$ for theme and it worth it.
I ordered theme directly from Australia. I didn't know there was a warehouse in USA. Do you have a link to reach theme?
It cost me roughly 500$$ for theme and it worth it.
-
- Posts: 55
- Joined: Sun Sep 27, 2009 11:54 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Audi 90 Quattro 20v
Torsion bar....
I was just looking on google at lift kits and the Dobinson bars and saw there was a location in florida when I used their website to find dealers.
My guess is maybe you got your bars from there? $500 isnt the worst! Thanks for the reply!
My guess is maybe you got your bars from there? $500 isnt the worst! Thanks for the reply!
It's not speed that kills. It's that stopping suddenly that really gets you. - JC (Jermey Clarkson)
- javabob
- Posts: 71
- Joined: Thu Feb 04, 2016 11:14 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: 1991 Exceed (P35W)
- Location: Minneapolis
Torsion bar....
This summer I called Dobinson in Florida. If I remember correctly they would ship it to my door for $350 usd.
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.
-
- Posts: 116
- Joined: Thu Sep 18, 2014 8:57 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Mitsubishi Delica 1998 Chamonix
- Location: Cherry Grove, Ab
Torsion bar....
350$ USD it's about the same price with all customs clearance fees ect..