Front skid plates for sale, interested?

Mitsubishi Delica Camper vans, lift kits & other Delica Accessories!

Moderator: BCDelica

Mr.SA
Posts: 59
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Post by Mr.SA »

I'm getting a front skid made, using the drawing from this page...
http://www.delica.ca/forum/viewtopic.ph ... e&start=30

Thinking we'll do a run of 8 of them, if anyone is interested let me know, and what kind of transmission, AT or Manual. also if anyone has input on what material, alu vs steel, and what thickness you'd want, hopefully we can use a material/thickness that would work for everyone.
User avatar
Crankshaft Culture
Posts: 85
Joined: Tue Jun 20, 2017 11:07 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1989 Delica
Location: Portland, OR
Contact:

Front skid plates for sale, interested?

Post by Crankshaft Culture »

I might be interested in a steel one. However, it depends on price.
Mr.SA
Posts: 59
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Post by Mr.SA »

Price I'm thinking will be around 200, depends on material and how much it'll cost to get them cut.
jesseydearing
Posts: 8
Joined: Fri Jul 21, 2017 9:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300 P35W Super Exceed
Location: Seattle
Location: Seattle, Washington

Front skid plates for sale, interested?

Post by jesseydearing »

I would be interested in one for a 1991 automatic L300. Aluminum would be fine for me. Any idea on price / interests yet?
1991 L300 P35W Super Exceed
Mr.SA
Posts: 59
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Post by Mr.SA »

Ok we've got our first two made, these are for a manual, since I can't test fit them, I'll sell for 150, though just holding up to my van it looks like it would fit really well. The bends match up perfectly to the drawings. I just have the front end of mine taken apart so can't actually fit it.

Message me if interested.

Also, after looking at it a bit, we're thinking of making a new two piece design that would have some cross bars that tie into the frame, then continues quite a ways further back. It would also completely illuminate the stock under engine pans or whatever those things are called? Hoping to have a design within a couple weeks.

We can still see these skids, but from here on out we may need to get the orders ahead of time to cover the cost of material since we'll be focusing on the other version.
FullSizeRender.jpg
FullSizeRender.jpg (121.27 KiB) Viewed 13680 times
Stella87
Posts: 42
Joined: Sun Dec 25, 2016 10:07 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica L300 P35W
Location: Flagstaff, Arizona

Front skid plates for sale, interested?

Post by Stella87 »

Interested! 1991 automatic as well, where are these being made? Post up a sketch of the two piece design if you get a chance
"Delilah" 91 L300 P35W Exceed
Mr.SA
Posts: 59
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Post by Mr.SA »

Stella87 wrote:Interested! 1991 automatic as well, where are these being made? Post up a sketch of the two piece design if you get a chance
In Colorado, my friends company makes jeep parts, we're doing it in his shop. The two piece thing COULD take awhile to get to a point where we have a design we could sell. it'll be a bit more involved.

We can definitely make a lot more of these skids for now though. I'm waiting till we get 4 interested people total till we make a run of skids for an auto l300. We're at two now.
P.Gaudreault
Posts: 116
Joined: Thu Sep 18, 2014 8:57 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica 1998 Chamonix
Location: Cherry Grove, Ab

Front skid plates for sale, interested?

Post by P.Gaudreault »

Is there a drawing for a L400 skin plate. I have never find one..
jesseydearing
Posts: 8
Joined: Fri Jul 21, 2017 9:36 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300 P35W Super Exceed
Location: Seattle
Location: Seattle, Washington

Front skid plates for sale, interested?

Post by jesseydearing »

Just checking to see if you had made anymore skid plates or had any others interested?

Cheers,

Jessey
1991 L300 P35W Super Exceed
Mr.SA
Posts: 59
Joined: Wed Mar 02, 2016 10:40 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300
Location: Denver

Front skid plates for sale, interested?

Post by Mr.SA »

jesseydearing wrote:Just checking to see if you had made anymore skid plates or had any others interested?

Cheers,

Jessey
I still have one for a manual ready to ship.

Im trying to get a run of autos made, we're doing them at a friends shop as time allows, Im thinking sometime in the next week we should have them made but i cant guarantee it.
manitoba
Posts: 29
Joined: Mon Aug 21, 2017 8:06 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400
Location: winnipeg

Front skid plates for sale, interested?

Post by manitoba »

I just got my '98 L400 v6 auto the other day and am thinking of adding a skid plate. If this is compatible I would love to be kept in the loop :-D
User avatar
3crows
Posts: 3
Joined: Sun Aug 20, 2017 5:35 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: delica l400 gas
Location: Cranbrook, BC

Front skid plates for sale, interested?

Post by 3crows »

I gots a 2000 L400 auto V6, would be interested too!
DL_DELICA
Posts: 4
Joined: Mon May 30, 2016 10:44 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1997 Delica Jasper Edition
Location: Vancouver

Front skid plates for sale, interested?

Post by DL_DELICA »

Wow that looks nice! I'd also be interested if it fits a 1997 L400 automatic. Let me know! Thanks!
User avatar
FalcoColumbarius
Site Admin
Posts: 5983
Joined: Tue Jan 22, 2008 1:55 pm
Member's Photo Album: http://www.delica.ca/Photos/index.php?cat=11103
Vehicle: Delica; Chamonix GLX ('92 P25W)
Location: North Van, BC, eh?

Front skid plates for sale, interested?

Post by FalcoColumbarius »

The original post is referring to a Starwagon (L300) Delica, which is a different animal than a Space Gear (L400) Delica.

Falco.
Sent from my smart pad, using a pen.

Seek Beauty... Image Good Ship Miss Lil' Bitchi

...... Vision without action is a daydream. Action without vision is a nightmare. ~ Japanese Proverb
definingdigital
Posts: 37
Joined: Sat Dec 17, 2011 7:07 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica
Location: Victoria, BC

Front skid plates for sale, interested?

Post by definingdigital »

I'd be interested in a Alum version for a 92 L300 auto.
Post Reply

Return to “Delica Modifications”