Do any of you have insights into the wiring of the flood/fog lights. I have 2 plugs with 3 wires in each. But the Bosche lights on my van only have 2 wires (power & ground).
Were the stock flood/fogs a high/low beam?
Bosch fog/flood's need properly wired
-
- Posts: 10
- Joined: Mon Apr 17, 2017 9:44 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: n/a
- Location: Washington State
-
- Posts: 211
- Joined: Sun Oct 02, 2016 8:11 pm
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: L300
- Location: GA USA
Bosch fog/flood's need properly wired
what year l300? On my 88 the fogs are not Hi/Lo switchable, but is only an Exceed. I don't know if that was an option on the Super and Royal trim levels but I doubt it. It'd be cool though I've never had my fog's apart but it looks like a one bulb/one clip affair. My fog's are labeled MM400 Magnum if that helps.
The "Zanimo Wagon" 1988 Mitsu Delica L300 StarWagon P25W 5spd
"Zowie Zow!"
"Zowie Zow!"
-
- Posts: 72
- Joined: Wed Sep 25, 2013 10:02 am
- Member's Photo Album: http://www.delica.ca/Photos/
- Vehicle: Ford E350 Econodeli powerveg
- Location: Maple Ridge, B.C.
- Location: Maple Ridge, B.C.
Bosch fog/flood's need properly wired
Are you sure your dealing with stock Mitsubishi wiring or aftermarket wiring Delis never came with high/low foglights Cheers Jay
"Electrickery Technition"