Remove Second Row Cigarette Lighter ????

Topics may eventually be moved to other Delica Canada forums.

Moderators: BCDelica, mark

Post Reply
Delicatessan
Posts: 13
Joined: Sat Jun 09, 2018 12:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300 ‘93
Location: Texas

Remove Second Row Cigarette Lighter ????

Post by Delicatessan » Wed Oct 24, 2018 8:07 pm

I want to remove my second row cigarette lighter. I can't figure out how to un-attach it. Has anyone done this?

User avatar
Growlerbearnz
Posts: 1951
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Remove Second Row Cigarette Lighter ????

Post by Growlerbearnz » Tue Oct 30, 2018 3:22 pm

Did you figure this one out? I removed mine so long ago I don't recall how it worked, but I'm curious. Most cigarette lighter sockets you unscrew the metal can/housing on the back.
Nothing says "poor workmanship" more than wrinkles in the duct tape.

Delicatessan
Posts: 13
Joined: Sat Jun 09, 2018 12:09 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica L300 ‘93
Location: Texas

Remove Second Row Cigarette Lighter ????

Post by Delicatessan » Fri Nov 02, 2018 6:51 am

I have disconnected it for now. That was easy. I just removed the ash tray and the deeper tray next to it and that gave me enough access to disconnect the wires. Since then, I’ve been pretty busy. I don’t quite have enough hand access to loosen the lighter from that position. So I’m probably going to have to remove panels (ugh). Will update when I tackle.

User avatar
Growlerbearnz
Posts: 1951
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

Remove Second Row Cigarette Lighter ????

Post by Growlerbearnz » Fri Nov 02, 2018 3:06 pm

Oh, you're absolutely going to have to remove the panel. The screwed-on can around the lighter sockets are usually super tight, there's no way you'll unscrew it with fingertips.
Nothing says "poor workmanship" more than wrinkles in the duct tape.

Post Reply

Return to “General Discussion”