What did you do TO your Delica today?

Topics may eventually be moved to other Delica Canada forums.

Moderators: BCDelica, mark

204explorer
Posts: 167
Joined: Sun Oct 02, 2016 10:19 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: l400
Location: CA

What did you do TO your Delica today?

Post by 204explorer »

I finally tackled my rattling tailgate. Ever since i got the van it sounded like a bunch of gravel was rattling in the bottom of it. Turns out its the glue that holds the inner structure to the outer shell let go. After cleaning it as good as possible I glued everything back in place using construction glue. I tried different kinds to experiment. I ended up using two kinds of LePage construction adhesive. Time will tell if this works. The pictures are not that good but some of you will know what i am talking about.
My tailgate now sounds much more solid when I close it.[img]https://uploads.tapatalk-cdn.com/201709 ... f7d220.jpg[/img][img]https://uploads.tapatalk-cdn.com/201709 ... f5f21e.jpg[/img][img]https://uploads.tapatalk-cdn.com/201709 ... ab11c0.jpg[/img][img]https://uploads.tapatalk-cdn.com/201709 ... 549f6a.jpg[/img]

Sent from my SM-G920W8 using Tapatalk
Hitomi
Posts: 6
Joined: Sat Oct 15, 2016 3:55 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Mitsubishi Delica
Location: Vancouver

What did you do TO your Delica today?

Post by Hitomi »

204explorer wrote:I finally tackled my rattling tailgate. Ever since i got the van it sounded like a bunch of gravel was rattling in the bottom of it. Turns out its the glue that holds the inner structure to the outer shell let go. After cleaning it as good as possible I glued everything back in place using construction glue. I tried different kinds to experiment. I ended up using two kinds of LePage construction adhesive. Time will tell if this works. The pictures are not that good but some of you will know what i am talking about.
My tailgate now sounds much more solid when I close it.
Sent from my SM-G920W8 using Tapatalk

It may be coincidence, or maybe every l400 tailgate comes apart, but I literally just picked up PL construction adhesive for the exact same reason as yourself. As in I just purchased it 1 hour before I read your post. I always have been annoyed by the shitty sound coming from there while on a bumpy road, and when closing the gate. So while I was messing around with some wiring and upgrading to LED bulbs my goal was to also do some soundproofing behind the interior panel of the tailgate. This is when I noticed the separation between the panels. Some wires are wrapped in a bit of foam for sound protection and some are not. My plan is to use some 1/4 inch foam weatherstripping I have lying around from walmart to wrap around wires etc. The rear window wiper motor is another culprit of shit noise. Before I'm done I will let allow some very trusted individual with more driving experience than myself, drive down a shit road with me in the back to identify all the sources of shit noise.
204explorer
Posts: 167
Joined: Sun Oct 02, 2016 10:19 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: l400
Location: CA

What did you do TO your Delica today?

Post by 204explorer »

Hitomi wrote:
204explorer wrote:I finally tackled my rattling tailgate. Ever since i got the van it sounded like a bunch of gravel was rattling in the bottom of it. Turns out its the glue that holds the inner structure to the outer shell let go. After cleaning it as good as possible I glued everything back in place using construction glue. I tried different kinds to experiment. I ended up using two kinds of LePage construction adhesive. Time will tell if this works. The pictures are not that good but some of you will know what i am talking about.
My tailgate now sounds much more solid when I close it.
Sent from my SM-G920W8 using Tapatalk

It may be coincidence, or maybe every l400 tailgate comes apart, but I literally just picked up PL construction adhesive for the exact same reason as yourself. As in I just purchased it 1 hour before I read your post. I always have been annoyed by the shitty sound coming from there while on a bumpy road, and when closing the gate. So while I was messing around with some wiring and upgrading to LED bulbs my goal was to also do some soundproofing behind the interior panel of the tailgate. This is when I noticed the separation between the panels. Some wires are wrapped in a bit of foam for sound protection and some are not. My plan is to use some 1/4 inch foam weatherstripping I have lying around from walmart to wrap around wires etc. The rear window wiper motor is another culprit of shit noise. Before I'm done I will let allow some very trusted individual with more driving experience than myself, drive down a shit road with me in the back to identify all the sources of shit noise.
It seems to me you also need a bettet radio and speakers to drown out all the rattling coming from the back. It works for me[emoji6]

Sent from my SM-G920W8 using Tapatalk
User avatar
bitnaut
Posts: 32
Joined: Thu Nov 17, 2016 7:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 Royal Exceed PD6W
Location: Vancouver
Contact:

What did you do TO your Delica today?

Post by bitnaut »

Finally got my roof rack and basket for my solar panel on the ol’ L400 Royal Exceed
CA85A112-671E-4AD7-BD4A-6387D176DA4A.jpeg
CA85A112-671E-4AD7-BD4A-6387D176DA4A.jpeg (492.81 KiB) Viewed 12043 times
User avatar
feetforbrains
Posts: 73
Joined: Sun Sep 17, 2017 10:59 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 Delica L300 Chamonix
Location: US

What did you do TO your Delica today?

Post by feetforbrains »

Fabricated two liscense plate adapters. Mounted plates. Looking fine

Sent from my Nexus 6P using Tapatalk
204explorer
Posts: 167
Joined: Sun Oct 02, 2016 10:19 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: l400
Location: CA

What did you do TO your Delica today?

Post by 204explorer »

I permanently installed a 3.5 amp battery charger in my engine bay. This way if i feel like my batteries need a top up or warming up during a cold manitoba winter night i dont have to fumble with stiff charger cables, I just plug in a extension cord.
My espar heater draws some juice plus long glow plug cycles plus short trips in the winter are hard on the batteries. The batteries are Delco, probably not the ones I would have chosen for this climate.[img]https://uploads.tapatalk-cdn.com/201710 ... db3db2.jpg[/img]

Sent from my SM-G920W8 using Tapatalk
User avatar
lrp374
Posts: 1023
Joined: Sun Nov 23, 2008 9:56 pm
Vehicle: 91 Super Exceed
Location: Kamloops

What did you do TO your Delica today?

Post by lrp374 »

Last week I was trying ( and still am ) to find the source of a current drain on my battery. I removed the panel from the rear door to check the latch and while there found out my van IS equipped with the bulbs to light up “Delica“ on the rear door. I searched through the L300 section of tech stuff and in general followed Profister's lead. (viewtopic.php?f=98&t=2143 ) I did upgrade to LED's equivalent to 20W incandescent which should be much brighter than the 8W units he used. Very impressed with the results. Only problem may be the LED's I used are for indoor use which I only found out when I went to install them.
Attachments
Size and packaging for LED
Size and packaging for LED
100_8341a.JPG (311.14 KiB) Viewed 11792 times
Old bulb and new LED
Old bulb and new LED
100_8342a.JPG (330.33 KiB) Viewed 11792 times
DELICA all lit up
DELICA all lit up
100_8344a.JPG (335.43 KiB) Viewed 11792 times
manitoba
Posts: 29
Joined: Mon Aug 21, 2017 8:06 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: L400
Location: winnipeg

What did you do TO your Delica today?

Post by manitoba »

2" lift kit installed today! Alignment is next. Rancho RS9000 series shocks on the way for all four corners.
delica lifted (3).jpg
delica lifted (3).jpg (182.19 KiB) Viewed 11757 times
I'm looking at these rims:

Pro Comp Rock Crawler Series 97, 15x8 Wheel with 6 on 5.5 Bolt Pattern - Black 97-5884
PCW_97_GLOSSBLACK.jpg
PCW_97_GLOSSBLACK.jpg (38.72 KiB) Viewed 11757 times
with Duratrac's 31x10.5x15

and these fender flares:
Pacer Performance 52-192 Flexy Flares Black 1-3/4" x 58" Heavy Duty Reinforced Rubber Fender Extension Kit - 4 Piece
https://www.amazon.ca/gp/product/B00029 ... YIK6Y9EEQB

Any advice is greatly appreciated!
User avatar
bitnaut
Posts: 32
Joined: Thu Nov 17, 2016 7:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1995 Royal Exceed PD6W
Location: Vancouver
Contact:

What did you do TO your Delica today?

Post by bitnaut »

Installed new JAOS bullbar with CIBIE fog lights and 14” BrightSource lightbar :-D
Attachments
0C815893-7319-473B-B038-713A749E0E0B.jpeg
0C815893-7319-473B-B038-713A749E0E0B.jpeg (764 KiB) Viewed 11500 times
E4754AD3-77D7-4AB8-928B-2785E44637CB.jpeg
E4754AD3-77D7-4AB8-928B-2785E44637CB.jpeg (357.62 KiB) Viewed 11667 times
User avatar
deskinthewoods
Posts: 231
Joined: Thu Mar 08, 2018 10:35 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300 Star Wagon named "Wilson"
Location: Wakefield, Québec

What did you do TO your Delica today?

Post by deskinthewoods »

Wilson at home.jpg
Wilson at home.jpg (160.71 KiB) Viewed 11020 times
Well, I bought this one (named him "Wilson") last week in Edmonton and drove it home to Wakefield, Qc, just north of Ottawa.
Tried to get it safetied on Monday but figured it wouldn't pass as Quebec safeties are notoriously tough, and it didn't. So over the last few days I have pulled off a rear leaf spring to have one broken leak replaced and reinstalled it
broken spring.png
broken spring.png (407.32 KiB) Viewed 11020 times
, adjusted the rear brakes where the left side adjuster was seized but I took it apart and got it adjusting again
Brake Adjuster siezed.png
Brake Adjuster siezed.png (711.72 KiB) Viewed 11020 times
, installed a new muffler, installed a rear top middle brake light, installed rear mud flaps, added reflectors front and rear sides,
Mud flaps and tail light.png
Mud flaps and tail light.png (797.26 KiB) Viewed 11020 times
cleaned the front headlights (as in, took them apart and cleaned the inside as they were full of dust - actually thought one was burnt out but it was just really dirty!), replaced every burnt out bulb I could find, reattached the front filler panels using zip-ties
Zip Ties.png
Zip Ties.png (729.25 KiB) Viewed 11020 times
and, tomorrow I will adjust the front left bearing...oh, and there is a sticker on the driver's door that says the tire size is 215 SR15 so I had to do a quick KIJIJI purchase of used tires ($40) as the 235/75R15 I JUST PURCHASED are "TOO big for the vehicle, monsieu".
Big Wheels.png
Big Wheels.png (560.93 KiB) Viewed 11020 times


Getting them swapped on Wednesday. Then, off to get it re-safetied and registered and plated. Then get the tires swapped back!!!
My dad used to say,"If you can read, you can do anything!"
thelazygreenfox
Posts: 901
Joined: Tue Jun 08, 2010 7:21 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 99 white Hi roof gas Chamonix
Location: Coquitlam B.C.
Location: coquitlam canada

What did you do TO your Delica today?

Post by thelazygreenfox »

Pacer Performance 52-192 Flexy Flares Black 1-3/4" x 58" Heavy Duty Reinforced Rubber Fender Extension Kit - 4 Piece
https://www.amazon.ca/gp/product/B00029 ... YIK6Y9EEQB

Any advice is greatly appreciated![/quote]
Hi Manitoba
The flexy flares work okay, may wrinkle a tiny bit in the flat top front fender wheels on the series 2 Deli. Not too many other solutions and certainly the price is good.

Try maching out a set of toyota mags. The centers need maching out but a much better idea than black steel rims. The offset is greater as well. I found a set cheap on craigslist. Talk to your tire shop about the rims, mine told me which ones to buy.

have fun
Wear your mask, it keeps others from seeing the parsley in your teeth
User avatar
deskinthewoods
Posts: 231
Joined: Thu Mar 08, 2018 10:35 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300 Star Wagon named "Wilson"
Location: Wakefield, Québec

What did you do TO your Delica today?

Post by deskinthewoods »

And now it is safetied and registered and on the road... :-D
My dad used to say,"If you can read, you can do anything!"
User avatar
deskinthewoods
Posts: 231
Joined: Thu Mar 08, 2018 10:35 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300 Star Wagon named "Wilson"
Location: Wakefield, Québec

What did you do TO your Delica today?

Post by deskinthewoods »

I was at the pumps the other morning, no coffee in yet, had the gasoline pump nozzle in my hand...."WTF!!!"...took some affirmative action...
fuel cap.png
fuel cap.png (159.51 KiB) Viewed 10825 times
Also, so I can not be in a zero caffeine state at the pumps again, cup holders!
cup holder.png
cup holder.png (189.37 KiB) Viewed 10825 times
Ans, for good karma generally...Buddy
Buddy.png
Buddy.png (225.25 KiB) Viewed 10825 times
My dad used to say,"If you can read, you can do anything!"
User avatar
Growlerbearnz
Posts: 2041
Joined: Sat Jun 26, 2010 1:58 pm
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: Delica P25W
Location: New Zealand

What did you do TO your Delica today?

Post by Growlerbearnz »

"I think the left front wheel locks up first" quickly got out of hand. Stripping and rebuilding the callipers, fitting thicker discs (from a Pajero or Pajero Sport), and a set of thoroughly mental Pagid RS5 brake pads because the race brake guy loves Delicas too.
IMG_20180621_193726 copy.JPG
IMG_20180621_193726 copy.JPG (81.96 KiB) Viewed 10712 times
And tomorrow, I get to bed the pads in! From the Pagid break-in procedure: "10 stops with low pressure from 150kph down to approximately 80kph, followed by a sequence of 5 stops with medium to high pressure from 180kph to approximately 60kph..."
I'm not sure the van will survive being pushed off a cliff 15 times, but we'll see.
Nothing says "poor workmanship" more than wrinkles in the duct tape.
User avatar
deskinthewoods
Posts: 231
Joined: Thu Mar 08, 2018 10:35 am
Member's Photo Album: http://www.delica.ca/Photos/
Vehicle: 1991 L300 Star Wagon named "Wilson"
Location: Wakefield, Québec

What did you do TO your Delica today?

Post by deskinthewoods »

Today, a rainy day...
EGR rain.jpg
EGR rain.jpg (81.94 KiB) Viewed 10651 times
I performed the EGR removal operation.

Now you see it...
EGR 1.jpg
EGR 1.jpg (85.27 KiB) Viewed 10651 times
now you don't...
EGR 4.jpg
EGR 4.jpg (72.3 KiB) Viewed 10651 times
I used some 3/8" steel I had on hand (overkill) for the blanking plates and installed an EGT probe while I was in there.
EGR 2.jpg
EGR 2.jpg (64.85 KiB) Viewed 10651 times
EGR 3.jpg
EGR 3.jpg (59.05 KiB) Viewed 10651 times
Hoping to get the EGT gauge installed later this weekend, maybe a Turbo Boost gauge, too...

[adden-dumb: got in to test drive Wilson and discovered I'd buried the seat belt buckle under the seat when I reinstalled it :shock: ]
Last edited by deskinthewoods on Sat Jun 23, 2018 2:54 pm, edited 1 time in total.
My dad used to say,"If you can read, you can do anything!"
Post Reply

Return to “General Discussion”