Took a few days off to rest and regroup. Boater's network located a filthy little shop in Guaymas. Not much to look at, but it was clear they had seen the insides of 1,000's of alternators. One day later, it was rebuilt, bearings and regulator, under $50, and it is still going strong, so it has outlasted the Canadian rebuild.
One other interesting Deli event. We were heading to the coral reef at Tenacatita for some snorkeling, and there was this loud POP and HISS. Thought I blew a tire, but the car handled fine, and I couldn't find anything wrong. Got back on Hwy 200, and when I put my foot down, at happened again! As long as I drove easy, it was OK, so we went ahead with our outing, and I dealt with it the next day. Turned out to be the turbo relief valve at the back of the intake manifold, right at the firewall. The waste gate link had seized, so that when I floored it, the turbo over-boosted, causing the safety valve to pop. Quite harmless, but alarming.
By bending the heat-shield a little, I was able to push hard on the link with a stick, while applying WD-40, and got it working again. No problem since, but I wish I knew what I could put on the linkage, to prevent a recurrence. It gets really hot.
- Biolume and Southern Cross
- Biolume, Crux.jpg (73.87 KiB) Viewed 15570 times
- Sunset Pelican
- Pelicano SS.jpg (65.64 KiB) Viewed 15570 times